Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Richardson
If your chimney is showing cracked mortar, a crumbling crown, or rust streaks down the brick, you’re in the right place. Chimney Sweep Lake Highlands handles chimney repair in Richardson with the full scope in one company – inspection, liner assessment, masonry repair, caps, crowns, and waterproofing – so nothing gets handed off and nothing gets missed. We know this city’s housing well: the older ranch blocks near downtown Richardson and the newer subdivisions off Renner Road each fail in their own way. Call (833) 508-9984 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Richardson Homeowners Call Chimney Sweep Lake Highlands for Chimney Repair
Chimney work is all we do. Every technician on every job is a chimney specialist, not a rotating generalist crew, and our technicians have up to 8 years of experience with the masonry and liner systems common in this part of North Texas. That single-trade focus matters most on older homes, where a repair decision usually comes down to reading a flue correctly rather than selling a rebuild.
We serve Richardson and the neighborhoods around it, and much of what we’re called out for here involves the 1950s and 60s brick ranch homes that make up so much of the city. Those chimneys were built with materials the trade has since learned a great deal about. We explain what we find in plain terms and back it up with a camera inspection and a photo report you can look at yourself. Our full chimney repair service covers the firebox to the cap, and our strong local reputation comes from doing exactly that.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Richardson
Richardson sits right where North Texas weather swings hard – long hot summers, then short freezes that crack mortar and spall brick. The repair services below address what we see most on Richardson chimneys, especially in the older masonry stock.
Mortar Repointing
Repointing is where most Richardson chimney repairs should start. Freeze-thaw cycles push water into the joints, and the mortar cracks and falls away while the brick behind it stays sound. A typical repointing job in Richardson runs $450-$1,200 depending on how much of the stack needs the joints ground out and rebuilt. We match the mortar to the brick so the repair blends in.
Spalling Brick Repair
Spalling is brick that has started to flake and break off its face, and it’s common on chimneys that have taken decades of Texas sun and the occasional hard freeze. A typical spalling repair in Richardson costs $600-$2,500, because the work involves removing the failed brick, checking what’s underneath, and rebuilding that section. Left alone, a spalled course keeps taking water deeper into the masonry.
Chimney Waterproofing
Waterproofing is the preventive step that keeps repointing and brick repairs from coming back. A breathable masonry sealer stops rain from soaking in while letting moisture already inside the wall escape, which matters in a climate with rapid warm-ups. Waterproofing a Richardson chimney usually falls in the $350-$800 range, and it’s the least expensive work we do per dollar of damage prevented.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the source of a lot of the water damage we find in Richardson. Worn or incorrectly installed flashing lets rainwater run down the chimney chase and into the ceiling. Field-repairing flashing typically lands between $300 and $700; a full replacement at the roof-to-chimney junction costs more, and we show you the failed section on camera before recommending it.
Trusted Brands We Service in Richardson
We work with professional-grade product lines the chimney trade trusts, including DuraFlex liner systems, Olympia Chimney components, Famco and Copperfield products, and HeatShield flue resurfacing. That matters when a repair needs a real system rather than a patch: a HeatShield application can resurface a deteriorated clay liner without a full tear-out, and DuraFlex or Olympia liners give a cracked flue a proper new path for the exhaust. We don’t stock parts and we don’t claim to, but we order what each job calls for and turn it around without delay. Using materials rated for the job is how a repair lasts through the next freeze.
Common Chimney Repair Problems We See in Richardson Homes
This is where Richardson is different from a lot of the metro. The older ranch homes were built for wood fires, and many now vent gas logs or share a flue with an old furnace. That changes what a repair actually involves.
- Clay-tile liners that crack after freeze-thaw swings. A hard February freeze followed by a fast warm-up spalls the clay tiles, and creosote and moisture reach the masonry behind them. This gets misdiagnosed as a simple sweeping issue when the liner itself needs a closer look.
- Single-wythe masonry chimneys without modern clearances. Many 75080 and 75081 ranch chimneys were built before today’s clearance rules, and neighboring rooftop vents or additions sit right up against the crown. That traps heat and causes mortar to crack off.
- Gas logs in a wood-burning firebox. Installing gas logs in a firebox designed for wood creates venting and carbon monoxide concerns, especially when the chimney shares a flue with the original furnace. This is one of the most common reasons we get called back to check a flue.
- Full-rebuild recommendations without evidence. Homeowners get told they need a complete rebuild when targeted repointing or waterproofing would do the job. We won’t recommend a rebuild without camera footage of the liner and crown to show you why.
The One Thing Richardson Chimneys Have That Newer Suburbs Don’t
Here’s a local situation worth understanding, because it drives a lot of the repair work in this city. In the 1950s and 60s ranch homes of the original Telecom Corridor neighborhoods, many fireplaces share a flue or a chase with the furnace vent. When that happens, what looks like a straightforward sweep turns into a chimney-versus-vent-and-CAV assessment, because the two appliances are competing for the same path out of the house. The newer 75082 subdivisions on the city’s west side, built around factory-steel flue systems, simply don’t have this problem. So the real question on an older Richardson chimney is often clearance and liner assessment, not just cleaning. Getting that wrong is where unsafe venting and needless rebuild quotes both come from, so we start with a camera inspection and show you the flue before we recommend anything.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Richardson, TX
Repair pricing in Richardson tracks the age and construction of the home more than anything else. A repointing job on a sound ranch chimney runs less than a rebuild on one that’s lost whole courses of brick. The ranges below are typical for this market and are estimates; the written estimate after inspection sets the final price.
| Repair | Typical Richardson range |
|---|---|
| Mortar repointing | $450-$1,200 |
| Spalling brick repair | $600-$2,500 |
| Chimney waterproofing | $350-$800 |
| Flashing repair | $300-$700 |
| Liner resurfacing (HeatShield) or relining | quoted per flue after camera inspection |
Nothing gets recommended without camera evidence, and if a repair can safely wait, we’ll tell you. Estimates are free.
We Also Serve Cities Near Richardson
Richardson sits close to several communities we cover, so a repair booked here often means we’re working nearby the same week. We serve Richardson along with Lake Highlands, North Dallas, Garland, and Sachse. If your chimney is on the edge of the city, it’s worth a call to confirm coverage before you book.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Richardson
Not necessarily. A cracked clay-tile liner often needs a liner system or resurfacing, not a full rebuild. Many sweep-only companies can’t perform this work, so they recommend a rebuild instead. We camera-inspect the flue first and show you the footage, then quote a HeatShield resurfacing or a DuraFlex liner if that’s what the liner actually needs. A rebuild is only on the table when the masonry structure itself has failed. Call (833) 508-9984 for an exact quote – estimates are free.
It’s a design from the era the home was built, not something added later, and it’s common in the older Richardson ranch blocks. The safety question depends on clearances and whether both appliances are venting correctly into a flue sized for them. When two appliances share a path, one can affect the draft of the other, which is why we assess the whole flue rather than just the fireplace. We’ll check clearances and venting on camera so you know where you stand.
Look for brick faces that are flaking or breaking off, and mortar joints that are cracked or crumbling, especially near the crown and the top few courses. The 2021 freeze hit hard and then warmed up fast, which is the pattern that cracks masonry. If you see white powder on the brick or pieces of mortar on the roof, that’s worth a look. A camera inspection tells you how deep the damage goes and whether repointing or a targeted brick repair will fix it. Call (833) 508-9984 for a free estimate.
It’s real preventive work, not an upsell, but it only makes sense on masonry that’s already sound. Waterproofing seals the brick against rain while letting trapped moisture escape, which is exactly what a hot-then-freezing climate calls for. If your mortar is already failing, waterproofing goes on after the repointing, not instead of it. We won’t sell it on a chimney that doesn’t need it. Call (833) 508-9984 and we’ll tell you straight.
That smell usually means air is coming down the flue and carrying creosote and soot odors into the room, or that moisture and debris have built up in the chimney. In older Richardson homes it can also come from a shared flue pulling air from another appliance. A camera inspection finds the cause before we recommend anything. If a repair can wait, we’ll say so. Call (833) 508-9984 for an exact quote – estimates are free.
Book Your Richardson Chimney Repair
If your chimney is showing cracks, spalling, or water damage, or you’ve been told it needs a rebuild and want a second look, call us. We handle the full scope from the firebox to the cap, we use materials the trade trusts, and we don’t recommend a repair you can’t see evidence for. Call (833) 508-9984 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lake Highlands.