Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across White Rock
If you live in one of White Rock’s brick bungalows or Tudor cottages, your chimney has been through a lot of Texas weather. We work on chimneys in White Rock regularly, and we know what the housing stock here does over time. Our technicians have up to 8 years of experience, and we handle the full scope – crown repair, cap installation, custom caps, and the flue work underneath. Call (833) 508-9984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why White Rock Homeowners Call Chimney Sweep Lake Highlands for Chimney Cap & Crown
The chimneys in White Rock are old. Most of the single-story brick bungalows and Tudor-style cottages around White Rock Lake date to the 1920s through the 1950s, and many still have their original masonry fireplaces and clay-tile liners. Those tiles are now 70 to 100 years old. That age is the whole reason cap and crown work here is different from newer construction.
We’re a chimney specialist, not a generalist crew that adds sweeps to a handyman list. Every technician on every job works on chimneys. We use materials the trade trusts – DuraFlex, HeatShield, Copperfield, Olympia Chimney, and Famco – because on a stack this old, the wrong cap or the wrong coating fails fast. Our technicians have up to 8 years of experience, and we bring a camera to every inspection so you see what we see. Nothing gets recommended without evidence on screen.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in White Rock
Our chimney cap & crown work is the most common thing we do in White Rock. That’s because the top of the chimney is where water gets in, and on a 1930s stack, water is what kills it. Here’s what each part of the work involves.
Cap Installation
A properly sized cap keeps rain, birds, and debris out of the flue while letting smoke escape. On White Rock’s older chimneys, we measure the flue first, because a cap that’s too small leaves gaps and a cap that’s too large blocks draft. A typical cap installation in White Rock runs $250 to $650, depending on flue count and whether the crown needs attention first.

Cap Replacement
Caps rust, and caps blow loose in North Texas wind. On the lake-area cottages, we often find a cap that’s been sitting crooked for a season, letting water run down onto the clay tiles and into the firebox. Replacing a rusted or loose cap is straightforward, and it’s the cheapest way to stop ongoing water damage. Expect $200 to $550 for a standard replacement.

Crown Repair
The crown is the concrete top that sheds water away from the masonry. When it cracks through – which freeze-thaw cycles do reliably around here – water wicks into the brick and mortar below. We rebuild or repair crowns so they slope correctly and drain away from the flue. A typical crown repair in White Rock runs $400 to $1,200, based on the size of the crown and the damage underneath.

Crown Coating
When a crown is cracked but still structurally sound, a proper coating seals it without a full rebuild. This is common on White Rock chimneys where the crown is showing hairline cracks from soil movement but hasn’t failed yet. Crown coating typically runs $300 to $800. We’ll tell you honestly when a coating will hold and when a rebuild is the better call.
Trusted Brands We Service in White Rock
We work with a curated roster of professional-grade brands that the chimney trade relies on: DuraFlex flexible liner systems, HeatShield flue resurfacing, Gelco and Famco cap products, Olympia Chimney components, and Copperfield supplies. Those names matter because a cap or crown product that’s wrong for a 1920s stack fails within a couple of seasons. We don’t stock parts – we spec what fits your chimney. On White Rock jobs, that usually means Olympia Chimney or Famco caps sized to the original flue, and HeatShield where the tile damage calls for resurfacing rather than a full reline. It means a faster turnaround and a fit that’s right for the age of the stack.
Common Chimney Cap & Crown Problems We See in White Rock Homes
Here’s the pattern we run into again and again in White Rock. It comes down to age, soil, and weather working on the same stack at once.
- Hairline flue-tile cracks that weren’t there last season. The expansive clay soils around the lake swell with moisture and settle in summer drought, flexing the stack. After a dry summer, we routinely find cracks in tiles that looked fine the previous fall – so a clean bill from last year isn’t permanent.
- Rusted or missing caps on 1920s-50s stacks. A loose cap lets water run straight into the firebox and smoke chamber, which speeds up crown and mortar decay. On these older chimneys, a missing cap is often the start of every other problem.
- Crowns poured flat or cracked through by freeze-thaw. North Texas’s rapid temperature swings crack a flat crown fast, and a crown that can’t shed water pushes it into the brick. That’s how a small crown crack turns into masonry repair.
- Appliances vented into original unlined flues. When a furnace or water heater is tied into a flue never designed for it, draft suffers and creosote load climbs. This is common in White Rock homes that were updated over the decades without the chimney keeping pace.
The Local Insight: Why White Rock Chimneys Need Seasonal Re-Inspection
Here’s something specific to White Rock. In the 75218 bungalows, a crown or cap that looked sound in spring often shows fresh hairline flue-tile cracks by fall. The expansive clay soils under the lake area swell and settle with the summer-to-drought cycle. That movement flexes the masonry stack, and the original clay tiles – now 70 to 100 years old – take the stress. So we re-inspect tiles season to season here rather than treating one clean inspection as permanent. That pattern is tied directly to the lake-area soil conditions, and it’s why annual inspection matters more in White Rock than in milder climates.
See the difference
Before
After
Before
After
Before
AfterHow a Typical Cap & Crown Job Goes in White Rock
A 1930s brick bungalow near the lake typically shows up with a crumbling chimney crown and a cap that has rusted or blown loose. Water has been getting into the masonry and down onto the old clay flue tiles. The usual driver is North Texas’s freeze-thaw swings and shifting clay soils flexing the stack, which opens hairline tile cracks and spalls mortar the crown no longer sheds water away from. A qualified local pro runs a Level 2 inspection with a camera and shows the homeowner the crown, cap, flashing, and flue liner on screen. Then the crown gets rebuilt or coated, a correctly sized or custom cap goes on, and liner work like HeatShield or a DuraFlex flue liner is only recommended where the video actually shows damage. That’s the standard we hold to.
Pricing for Chimney Cap & Crown in White Rock, TX
Pricing is per job, set by a written estimate. Typical ranges for White Rock:
| Service | Typical Range |
|---|---|
| Cap installation | $250 – $650 |
| Cap replacement | $200 – $550 |
| Crown repair | $400 – $1,200 |
| Crown coating | $300 – $800 |
| Custom multi-flue cap | $600 – $1,400 |
What moves the number: flue count, crown size, whether cracks have reached the masonry, and whether the flue needs attention underneath. The estimate is free, and the written estimate sets the final price. We won’t quote liner or masonry work off a glance – the video has to show it first.
We Also Serve Cities Near White Rock
We also work in the communities around White Rock, including Forest Hills, Lochwood, Casa View, and Lakewood. The housing stock is similar across much of this area – older brick homes, original masonry fireplaces, and the same clay-soil movement that stresses White Rock chimneys. If you’re in any of these neighborhoods, we can help. You can find more about our work in White Rock and the surrounding area.
Serving White Rock, TX – Our Local Coverage Area
We serve White Rock and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in White Rock
A bad crown or cap lets water in and lets the stack run wet and cold, which hurts draft and lets creosote build up faster. A cracked crown and a loose cap both admit moisture that degrades the flue, and a flue that never warms properly doesn’t pull smoke the way it should. That combination means more creosote and more risk. We check the crown, cap, and flue together with a camera so you see what’s driving it. Call (833) 508-9984 for a free estimate.
We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Fast dispatch from 7am to 7pm means we can often reach White Rock the same day. We’re closed on Saturday. Call (833) 508-9984 to book.
Yes. We work throughout White Rock and the surrounding communities, including Forest Hills, Lochwood, Casa View, and Lakewood. The older bungalows and Tudor cottages around White Rock Lake are the homes we know best, since their chimneys follow the same aging pattern. Call (833) 508-9984 for an estimate.
Often, yes. Cap replacement and crown coating are frequently same-day jobs once we’ve inspected. Crown rebuilds may need a return visit depending on the damage. We’ll tell you at the estimate which it is, and nothing gets recommended without camera evidence you can see. Call (833) 508-9984.
Not much – pricing follows the job, not the ZIP code. The ranges you see here apply across White Rock and the nearby communities, since the housing stock and clay soils are similar. The written estimate sets the final price, and the estimate is free. Call (833) 508-9984 for an exact quote.
If your White Rock chimney needs a new cap, a crown repair, or just a straight answer about whether it can wait, call us. We’ll inspect with a camera, show you what we find on screen, and tell you plainly when work can safely wait. Call (833) 508-9984 for a free estimate.
Written by the team at Chimney Sweep Lake Highlands.