Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Richardson
If your Richardson chimney has a cracked crown or a missing cap, you’re looking at the two most common ways North Texas water gets into a masonry stack. We handle cap and crown work across Richardson, from the original ranch blocks in 75080 to the newer subdivisions out toward 75082. Local expertise matters here because Richardson’s chimneys aren’t generic: many were built in the 1950s and 60s with clay-tile liners sized for wood fires, and the cap and crown decisions on those homes have to account for what’s actually venting through the flue today. Call (833) 508-9984 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Richardson Homeowners Call Chimney Sweep Lake Highlands for Chimney Cap & Crown
Chimney Sweep Lake Highlands is a single-trade chimney company, not a generalist crew that adds a sweep to the invoice. Every technician on a Richardson job is a chimney specialist, and our technicians have up to 8 years of experience with the masonry and pre-fab systems this city’s housing stock actually contains. We connect you with the local pro who handles the work, and that pro is licensed and insured as Texas requires.
Richardson homeowners tend to be careful about who they let on the roof, and reasonably so. The trade’s worst upselling happens at the crown and liner, where a homeowner can’t see the problem and has to take someone’s word for it. We don’t work that way. Nothing gets recommended without camera evidence you can watch yourself, and we’ll tell you plainly when a crown can wait a season and when it can’t.
We work with product lines the chimney trade recognizes, including Famco and Copperfield caps, so a replacement is matched to the flue it sits on rather than whatever fits the truck. That matters most on the older Richardson ranch blocks, where a cap over an undersized clay flue venting gas logs is not a universal-fit part.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Richardson
Cap Installation in Richardson
A properly fitted cap keeps rain, squirrels and nesting birds out of the flue and keeps sparks off the roof. On Richardson’s older masonry chimneys, the cap also has to be sized to the actual flue opening, which is often smaller than the appliance now drawing through it after a conversion to gas logs. We measure the flue and set the cap to match.

Cap Replacement in Richardson
Most of the rusted, wind-bent caps we replace in Richardson have been on the chimney since well before 2018 and were never sized for the appliance drawing through it now. A cap that’s too loose rattles in a storm; one that’s too tight chokes draft. Replacement starts with a look at what’s venting, not just what’s on the crown.

Crown Repair in Richardson
The crown is the concrete slab on top that sheds water away from the masonry, and on 1950s-60s single-wythe chimneys in 75080 and 75081 it’s the first thing to go. Repeated freeze-thaw swings crack it, water gets behind it, and the masonry below starts spalling. Crown repair rebuilds the slope so water runs off instead of soaking in.

Crown Coating in Richardson
Crown coating seals a crown that’s still structurally sound but has surface cracking. It is not a fix for a crown that’s already failing, and we won’t apply a coating over deteriorated mortar to hide a problem. Before any coating goes down in Richardson, we check the liner with a camera so we know the crown isn’t the only thing worth sealing.
Trusted Brands We Service in Richardson
We work with professional-grade chimney brands, including Famco and Copperfield for caps and DuraFlex and HeatShield for liner work when the inspection shows the flue needs attention. We don’t claim to stock parts locally; the local pro brings what the job calls for. What that buys you in Richardson is a cap or crown matched to the flue you actually have, including the undersized clay-tile flues common in the older ranch stock, rather than a generic part forced to fit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Richardson Homes
- Cracked and spalling crowns on single-wythe masonry. The 1950s-60s ranch chimneys in 75080 and 75081 take the worst of DFW’s freeze-thaw swings, and a hard February like 2021 followed by a fast warm-up is when the cracks open. Once the crown fails, water gets into the masonry and the damper starts to rust.
- Missing or rusted caps over clay flues now venting gas logs. When a homeowner swaps wood for gas logs, the original flue often becomes undersized for the new appliance, and an old cap sized for a wood fire can choke the draft. That’s why cap work here is tied to a liner check, not done on its own.
- Improper cap or crown replacement that ignores shared furnace flues. In pre-1960 Richardson homes, the chimney is sometimes shared with an old furnace flue, and a cap or crown done without checking that can cause a carbon monoxide safety callback. We check every flue in the stack before we cap it.
- Crown coating over deteriorated mortar. Coating a failing crown hides the spalling instead of stopping it, and the water keeps working its way down. We only coat a crown the camera shows is sound underneath.
Pricing for Chimney Cap & Crown in Richardson, TX
Richardson pricing runs close to the rest of the metro, and the written estimate you get sets the final price. A typical cap installation in Richardson runs $250 to $450, and a custom or multi-flue cap for a wider stack runs $400 to $800. Crown repair on a cracked masonry crown typically runs $450 to $900, and crown coating runs $300 to $600 when the crown is sound enough to coat. A full crown rebuild where the slab is failing runs higher. What moves the number is the size and shape of the crown, whether the flue needs attention underneath, and whether the stack is shared. The estimate is free, and you’ll see the camera evidence before anything is recommended.
We Also Serve Cities Near Richardson
We work across Richardson and the neighborhoods around it, including the blocks that sit right against Lake Highlands and North Dallas, plus Garland and Sachse to the east. If you’re in one of those edge neighborhoods and not sure which side of the line you’re on, it doesn’t change the work. You can see more about how we serve Richardson and the surrounding area, or call us and we’ll confirm coverage.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Richardson
No. A cap keeps water out of the flue, but it won’t stop water soaking into a cracked crown and the masonry below it, so capping without repairing the crown leaves the real problem in place. On the older 75080 ranch chimneys, the crack is usually how the water gets in, and the cap is what you add once the crown is sound. Call (833) 508-9984 for an exact quote and a look at what the crown is actually doing.
Because on Richardson’s older chimneys the cap and the flue are one decision, not two. A Level 2 inspection with a camera shows whether the clay-tile liner is spalling and whether the flue is sized for what’s venting through it, which tells us what cap will actually work. Without that, a cap quote is a guess. Estimates are free, and the camera check comes before any recommendation.
Usually not a custom one, but it does need a cap matched to the manufacturer’s clearance for that system. The newer 75082 subdivisions skew to factory-built metal fireboxes, which only need light sweeping but have specific cap and clearance requirements that a generic masonry cap won’t meet. We check the system first, then fit the cap to it. Call (833) 508-9984 if you’re not sure what you have.
You check it against the flue and the appliance, which means looking at both. A cap sized for the original wood fire can be too tight once gas logs are drawing through an already undersized clay flue, and the sign is smoke or poor draft rather than anything you can see from the ground. A camera inspection settles it. Estimates are free, so call (833) 508-9984 and we’ll size it right.
Crown repair rebuilds a crown that’s cracked or failing so it sheds water again; crown coating seals a crown that’s still sound but has surface cracking. The difference is whether the crown underneath can do its job, and only a camera check tells you that. On Richardson’s freeze-thaw-damaged masonry, we won’t coat a crown that needs rebuilding. Call (833) 508-9984 for a free estimate.
If your Richardson chimney needs a cap or crown, call (833) 508-9984 for a free estimate. The local pro is licensed and insured as Texas requires, you’ll see camera evidence before anything is recommended, and the written estimate sets the final price. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lake Highlands.