Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Richardson
Fireplace repair in Richardson usually starts with a camera, not a wrench. If your gas logs won’t light, your damper fights you, or the firebox smells like old smoke, the cause is often up the flue rather than inside the box. We work on Richardson’s older masonry chimneys and its newer factory-built fireplaces every week, and we know the difference between a repair and a reburn problem. Call (833) 508-9984 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Richardson Homeowners Call Chimney Sweep Lake Highlands for Fireplace Repair
We serve Richardson as a Richardson chimney and fireplace specialist, not a generalist crew that adds fireplaces to a long list of other work. Every technician on every job is a chimney specialist, which matters in a town with as mixed a housing stock as this one. Our technicians have up to 8 years of experience, and that experience is spent on flues, fireboxes, dampers and venting rather than on a rotating set of trades.
Richardson homeowners tend to ask good questions before they book, and we’d rather answer them than sell past them. Nobody should authorize liner or masonry work they can’t verify. So nothing gets recommended here without camera evidence you can watch for yourself, and we’ll tell you plainly when a repair can safely wait. We handle the full scope, from the firebox to the cap, so a discovery during the inspection doesn’t turn into a handoff to another company.
Our service area covers the neighborhoods across Richardson, from the older ranch blocks near the original Telecom Corridor to the planned subdivisions out toward Canyon Creek. Materials come from professional lines the trade trusts, including DuraFlex, Olympia Chimney and Copperfield, and we bring the right parts for the diagnosis rather than guessing at the counter. If you want a straight read on what your fireplace actually needs, that’s the conversation we’re built for.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Richardson
Gas Fireplace Repair
Gas fireplace repair in Richardson often turns on clearance and venting as much as the burner itself. Many of the older masonry fireboxes here were built for wood and later fitted with gas log sets, and the flue was never sized for the new appliance. We check the whole assembly, gas valve to termination, before we touch anything.

Wood Burning Fireplace Repair
Wood burning fireplaces in the original ranch homes carry decades of use, and the wear shows at the firebox floor, the damper and the flue tiles. We repair firebox masonry, refit dampers and assess whether a clay-tile liner is still sound. If the tiles are cracked or spalling, you’ll see it on camera before we quote a fix.

Fireplace Insert Service
Inserts are common across the newer Richardson subdivisions, and they bring their own requirements: manufacturer clearances, a properly sized liner and a flue that matches the appliance. We service inserts already in place and assess whether the surround and venting were installed to spec. Factory-built steel systems rarely need masonry work, but they do need the clearances checked.

Damper Repair
A damper that sticks open or won’t seal is one of the most common calls we get in Richardson. On older fireplaces the damper frame rusts and the pivot wears, so the plate hangs or jams. We repair or replace the damper so the fireplace closes when it should and drafts when you light it.
Our fireplace repair work also covers the firebox itself, where heat, moisture and years of idled burns break down mortar joints and brick faces. A firebox that’s lost its mortar doesn’t hold heat where it belongs, and that’s a repair, not a cosmetic issue.
What Richardson’s Older Chimneys Actually Need
Most fireplace repair calls in the 75080 and 75081 ranch blocks aren’t really about the firebox. They’re about a masonry chimney whose clay-tile flue was sized for wood smoke but now carries a gas log set or an old furnace flue. That changes the whole question. It’s no longer “does this need a sweep” but “is the liner intact, and does the new appliance have the clearance it needs?” That’s a fundamentally different job from the 75082 subdivisions, where factory-built steel flue systems carry manufacturer-specific clearance specs and rarely need masonry work at all.
A typical job in the original ranch homes starts the same way. A homeowner lights a gas log set for the first time in months and finds the pilot won’t stay lit, the damper won’t open fully, or a rust line has formed at the firebox floor. A qualified local technician begins with a Level 2 inspection and a camera run up the flue before touching the gas valve or the firebox. On that older single-wythe masonry, the camera commonly shows cracked or spalled clay tiles and glazed creosote from years of idled burns, which leads to a liner or damper work order rather than a simple sweep. In the 75082 pre-fab homes, the same symptoms usually resolve to clearance checks and pilot assembly service. Same complaint, different building, different answer.
North Texas weather adds to it. Long, hot summers idle these fireplaces for most of the year, so creosote hardens and birds and squirrels build nests in open flues. Then a hard freeze like 2021 comes through, followed by a fast warm-up, and the clay tiles crack and mortar spalls off the older masonry. Post-freeze inspection calls spike for exactly that reason. On pre-1960 homes, chimneys are sometimes shared with an old furnace flue, which is a common source of carbon monoxide callbacks. A simple sweep can turn into a vent-and-CO safety work order, and that’s a finding worth knowing about.
There’s a local wrinkle that surprises people. In the older ranch blocks, neighboring rooftop vents and later additions sometimes sit pressed against a chimney crown, and many 75080 fireplaces share a flue or chase with an old furnace. A chimney built before modern clearances doesn’t always match today’s code, and the fix isn’t always big. It just has to be identified before it’s priced.
Trusted Brands We Service in Richardson
We work with professional-grade product lines the chimney trade relies on, including DuraFlex flexible liner systems, Olympia Chimney components, Famco caps and Copperfield supplies. We don’t claim to stock these locally; we source the right part for the diagnosis and get it installed without a long delay. If your fireplace takes a specific cap, liner or damper assembly, we’ll tell you what it is and why it fits. Using materials suited to the job is how a repair holds up through the next freeze and thaw.
Common Fireplace Repair Problems We See in Richardson Homes
- Gas log sets in wood-built fireboxes. Many older Richardson fireplaces had gas logs added later, leaving less clearance than the firebox was designed for and a flue never sized for the new appliance. The repair is often liner and venting work, not a burner swap.
- Clay-tile liners cracked by freeze and thaw. A hard freeze followed by a rapid warm-up cracks the tiles and knocks mortar loose on the older masonry chimneys. Cracked tiles let heat and carbon monoxide migrate into the chimney chase, which is why we run a camera before quoting a liner.
- Shared flues with an old furnace. Some pre-1960 Richardson homes still have a furnace vented into the same stack as the fireplace. That arrangement deserves a careful look, because a routine sweep can turn into a vent and CO safety work order.
- Sticking dampers and rusted firebox floors. Years of idled burns and humid summers rust the damper frame and leave a rust line at the firebox floor. Both are repairable, and leaving them lets moisture work deeper into the masonry.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Richardson, TX
Here’s what fireplace repair typically runs in the Richardson market, stated as estimates rather than promises. A gas fireplace service call, covering pilot and burner diagnosis, usually lands around $180 to $420. Damper repair or replacement runs about $220 to $650 depending on the assembly. Firebox masonry repair, including mortar and brick work, typically runs $350 to $1,200. A liner assessment or reline is a bigger job, generally $2,500 to $6,500. What moves the number is the building: the 75082 factory-built fireplaces tend to need lighter work than the older single-wythe masonry in 75080 and 75081. Every price is set per job by a written estimate, and the estimate is free. You’ll see the camera findings before a number is written down.
We Also Serve Cities Near Richardson
Our service area reaches the neighborhoods around Richardson, including Lake Highlands, North Dallas, Garland and Sachse. If you’re just outside the Richardson line, call and we’ll confirm coverage for your address. The same camera-first approach applies whether your home sits on an older masonry chimney or a newer factory-built system.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Richardson
It’s usually a repair issue, not a sweeping issue, because the real question is clearance and liner integrity rather than creosote buildup. A gas log set in a firebox built for wood leaves less clearance than the box was designed for, and the flue was never sized for the new appliance. A camera inspection tells you whether the liner is sound before anything is quoted. Call (833) 508-9984 for an exact quote – estimates are free.
It cracked because clay tile is brittle and doesn’t tolerate the freeze-and-thaw swings North Texas gets. Water gets into the tiles and mortar, freezes, expands, then releases on the warm-up, and that cycle spalls the tile faces and cracks the joints. It’s a common finding on the older masonry chimneys in Richardson after a hard freeze like 2021. The camera shows the damage so you can decide with evidence. Call (833) 508-9984 for an exact quote – estimates are free.
Your damper is likely rusted at the frame or worn at the pivot, so the plate hangs open instead of sealing. When it stays open, warm air and moisture move up the flue and the firebox picks up a creosote smell, and on older Richardson fireplaces that rust is a routine finding. A damper repair or replacement usually resolves it. Call (833) 508-9984 for an exact quote – estimates are free.
It’s usually a repair, though a dirty pilot assembly can mimic a failing one. A thermocouple or thermopile that’s drifted, a pilot orifice with debris, or a venting issue can all put the pilot out, and the diagnosis depends on the appliance and its clearances. In the 75082 subdivisions the answer is often a pilot assembly service; on older masonry it pays to check the flue too. Call (833) 508-9984 for an exact quote – estimates are free.
You can ask for a sweep, and we’ll tell you honestly whether the symptoms you describe warrant more. If you’ve had a gas log set added, a freeze crack, or a smell in the firebox, a Level 2 inspection with a camera comes first so nothing gets recommended blind. If the flue looks clear on camera, a sweep is all you need. Call (833) 508-9984 for an exact quote – estimates are free.
Book Fireplace Repair in Richardson
If your fireplace has sat idle through the summer, is acting up after a freeze, or hasn’t had a look in years, a camera inspection answers the question in one visit. Nothing is recommended without evidence you can see, and we’ll tell you when a repair can wait. Call (833) 508-9984 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
Written by the team at Chimney Sweep Lake Highlands.