Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Garland
If your fireplace smokes into the room, your damper won’t open, or your firebox mortar is crumbling, we repair fireplaces across Garland and the surrounding neighborhoods. We know this city’s housing stock well: the 1950s and 1960s ranches off Avenue D and Broadway, the post-war brick homes that line the streets near downtown Garland, and the older blocks where original masonry fireplaces are still doing daily work. That matters, because the repair a Garland fireplace needs is usually different from what a newer suburban fireplace needs. Call (833) 508-9984 and we’ll talk through what you’re seeing before we ever schedule a visit.
Why Garland Homeowners Call Chimney Sweep Lake Highlands for Fireplace Repair
Fireplace repair is one of five core services we handle, alongside sweeping, inspection, cap and crown work, and structural chimney repair. That focus means the technician at your door works on fireplaces and chimneys, not on a rotating list of home systems. Our technicians have up to 8 years of experience.
We handle the full scope from the firebox to the cap, so a repair doesn’t get split between trades or handed off halfway through. When we open up a firebox, we’re also looking at the damper, the smoke chamber, and the flue above it, because a fireplace problem in Garland is rarely just a fireplace problem.
Our Garland customers tend to want a clear explanation more than a low bid. We try to deliver one: what we found, what it means, and what can safely wait. We’ll show you the camera footage from your own flue rather than describe it and ask you to take our word. If you’re comparing us against another chimney company, that footage is the thing to ask for.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Garland
Garland fireplaces fall into a few recognizable categories, and the repair path differs for each. Here’s how we approach the most common work in this city.
Wood Burning Fireplace Repair in Garland
Wood-burning repairs are the heart of what we do here. In older Garland homes, a fireplace that smokes or won’t draft usually has more than one thing wrong: a firebox with washed-out mortar joints, a smoke chamber that’s rough and unsealed, and a flue above it that’s no longer doing its job. We rebuild and resurface fireboxes using HeatShield where the masonry can be saved, and we relay brick where it can’t.

Damper Repair in Garland
Original dampers in Garland’s 1950s and 1960s ranches are often rusted open or frozen shut. A damper stuck open is a heat loss problem and a wildlife entry problem; one stuck closed means you can’t burn at all. We repair the existing damper where the frame is sound and replace it with a top-sealing model when it isn’t, which also keeps debris and animals out between burns.

Gas Fireplace Repair in Garland
Gas fireplaces in Garland get retrofitted into fireboxes that were built for wood, and that changes what a repair looks like. Pilot lights that won’t stay lit, burners with weak or uneven flame, and ignition problems are all common on gas sets that sit unused for months. We service the gas side and check that the flue or vent configuration actually suits the appliance, because a gas set vented into an oversized unlined stack will run poorly no matter how many parts get replaced.

Fireplace Insert Service in Garland
Inserts added to Garland fireplaces later in their lives are one of the more common sources of trouble we run into. An insert sized for one flue and dropped into another creates draft problems and lets combustion byproducts condense into masonry that was never lined for that appliance. We inspect the insert, its connection, and the flue it vents into, then recommend a properly sized liner where one is needed. Our fireplace repair work covers the appliance and the stack together, which is the only way to solve these.
Trusted Brands We Service in Garland
We work with professional-grade product lines the chimney trade relies on: DuraFlex flexible liner systems, Olympia Chimney components, Famco caps, and Copperfield supplies. These aren’t commodity parts picked up at a big-box store. They’re what professional chimney contractors across the country install because they hold up to the heat cycling and freeze-thaw swings we put them through in North Texas. Using brands like these means a repair that outlasts the season, and it means we can match the material to your specific flue rather than forcing a generic fit.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Garland Homes
The problems below show up again and again in Garland, and each one is diagnosable with a camera and a clear explanation.
- Clay-tile flues at end of service life. The 1950s and 1970s brick ranches in 75040 and 75041 were built with clay-tile flues that are now at or past their expected life. Cracked or offset tiles let creosote and heat reach the surrounding masonry, and you only find them with a camera up the flue.
- Freeze-damaged crowns and spalling brick. The February 2021 freeze cracked a lot of Garland chimney crowns that looked fine from the ground. Homeowners often spot the result months later as water staining on the ceiling below and assume it’s a roof leak.
- Rusted or seized original dampers. Original dampers in Garland ranches corrode open or shut. Third-degree creosote glazing, which a brush cannot remove, has to be addressed before any firebox repair can proceed safely.
- Inserts and gas sets vented into the wrong flue. Appliances retrofitted into flues that were never sized or lined for them kill draft and let combustion byproducts condense into old masonry. This is the source of a surprising share of “fireplace won’t draw” calls in Garland.
Pricing for Fireplace Repair in Garland, TX
Here’s what fireplace repair typically runs in Garland. A typical damper repair in Garland runs $175 – $450 depending on whether the frame can be saved or the damper is replaced with a top-sealing model. Firebox repointing and mortar repair usually runs $400 – $1,200, while a full firebox rebuild with HeatShield resurfacing can run $1,200 – $2,500. Gas fireplace service on pilot and burner issues typically falls between $150 and $400. A flue reline, when the camera shows it’s needed, runs considerably more, and the written estimate sets that figure before any work starts. Your estimate is free, and nothing is recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Garland
Garland sits close to several communities we work in regularly, including Sachse to the north, Rowlett to the east, Forest Hills, and Lake Highlands to the west. If you’re just outside the Garland line and need fireplace work, we likely cover your area. When you call, tell us where you are and we’ll confirm coverage for Garland and the surrounding cities before we book.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Garland
Some original clay flues can be repaired and some need a full reline, and the only honest way to answer is with a camera. If the tiles are cracked, offset, or missing joints, a reline with a DuraFlex system is usually the right call; if the tiles are sound and the problem is a failed damper or unsealed smoke chamber, we repair those and leave the flue alone. Call (833) 508-9984 for a free estimate, and we’ll show you the footage so you can see what we see.
Yes. A hairline crown crack lets water into the stack every time it rains, and that water works its way down to the ceiling below over months or years. What looks cosmetic at the top of the chimney is usually the start of a much more expensive repair lower down. Crown repair is a modest job compared to what water damage costs, so call (833) 508-9984 and we’ll take a look.
Smoking after a sweep almost always means the problem isn’t creosote. A dirty flue is one cause of poor draft, but a flue that’s the wrong size for the firebox, an unsealed smoke chamber, a rusted-open damper, or an insert vented into a mismatched flue will all smoke no matter how clean the chimney is. A camera inspection tells you which one it is. Call (833) 508-9984 for a free estimate.
Often it isn’t, and that’s exactly what an inspection is for. Inserts retrofitted into Garland fireplaces frequently vent into flues that were never sized or lined for the appliance, which kills draft and lets combustion byproducts condense into the old masonry. The fix is usually a correctly sized liner connected to the insert. Call (833) 508-9984 and we’ll check the connection and the flue together.
Yes, because the things that damage a Garland chimney most aren’t about how much you burned. Freeze-cracked crowns, spalling brick, animal nesting, and water intrusion all happen whether or not you lit a fire, and the clay soils here shift with moisture and stress the chimney base. An inspection is how you catch those while they’re still small. Call (833) 508-9984 for a free estimate.
Ready to get your Garland fireplace sorted out? Call (833) 508-9984 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lake Highlands.