Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Forest Hills
If your chimney cap is rusted, your crown is cracked, or your fireplace smokes back into the room, we handle cap and crown work for Forest Hills homeowners. We’re a chimney-only company, so the technician who shows up does this every day, not a generalist fitting in a flue job between gutter cleanings. Forest Hills is a short run for us, and we know the housing stock here well enough to bring the right parts and the right inspection standard on the first visit. Call (833) 508-9984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Forest Hills Homeowners Call Chimney Sweep Lake Highlands for Chimney Cap & Crown
Most of what we see in Forest Hills isn’t a chimney that’s falling apart. It’s a cap that quit doing its job. This is the older close-in east Dallas corridor, and the homes were built with wood-burning fireplaces as a standard feature. Six and seven decades later, the original masonry and the original crown on top of it are still doing the work. When something fails up there, you need someone who reads the whole chimney, not just the part that looks bad.
Our technicians have up to 8 years of experience, and every one of them works chimney jobs exclusively. That focus matters here, where a factory-built insert and a 1950s clay-tile flue can sit in the same house and need to be checked against two different sets of standards. We work with the materials the trade actually trusts, including Famco and Copperfield caps, and we’ll tell you plainly when a repair can safely wait. We don’t sell liner work nobody can verify. If we recommend it, you’ll see the camera evidence yourself before anyone books a thing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Forest Hills
Cap and crown problems are the most common source of chimney water damage, and they’re where we spend most of our time on Forest Hills roofs. Here’s what each job actually involves.
Custom Cap Installation in Forest Hills
An off-the-shelf cap rarely lands flush on an original clay flue opening, and the gaps that leaves are exactly where rain and squirrels get in. We measure the actual flue tile, then have a custom cap built to fit it, with a mesh screen sized to keep out the pecan and live-oak litter that rains down on these roofs every fall. A custom cap protects the flue the way the manufacturer of your chimney, or the mason who built it, would have wanted.

Cap Replacement
If your cap is rusted through, bent, or missing a section of screen, replacing it is usually the simplest fix. Factory-built chases especially need a manufacturer-matched or exact-fit replacement, since the chase was never designed for whatever hardware someone bolted on later. We pull the old cap, clear out whatever’s packed behind it, and fit the new one so it seals and drafts the way it should.

Crown Repair
Hail-driven cracking on a decades-old mortar crown is a recurring pattern on Forest Hills masonry chimneys, and water gets into the flue through cracks you can’t see from the ground. We repair the crown where it can be repaired, and we check the clay liner underneath before we seal anything over it. Capping a flue that’s already taking on water just keeps the problem locked inside.

Crown Coating
A crown that’s intact but showing surface wear can often be coated rather than rebuilt. A proper coating seals the mortar face against North Texas heat, drought, and the spring storms that hammer these roofs, and it’s a cheaper way to buy years out of a crown that isn’t structurally failing. We’ll tell you honestly whether coating will hold or whether a repair or rebuild is the right call.
Multi-Flue and Custom Caps for Forest Hills Chimneys
Plenty of Forest Hills homes have more than one flue opening sharing a single chimney top, and a single-flue cap leaves the rest exposed. A multi-flue cap covers the whole stack with one unit, with a screen that fits the combined footprint. That’s usually cleaner than stacking separate caps side by side, and it’s easier to keep clear of leaves. For irregular tops, odd tile spacing, or a chimney that’s been modified over the years, a custom cap built to the actual measurements is the only way to get a real seal. This is where a lot of generic cap jobs go wrong: somebody forces a standard cap over a non-standard opening, and the water finds the gap by the next storm.
Trusted Brands We Service in Forest Hills
We work with cap and crown products from Famco and Copperfield, and when a cap job uncovers liner trouble, we use DuraFlex liner systems and HeatShield flue resurfacing. These are industry-recognized names in the chimney trade, not commodity hardware from a big-box shelf. We don’t claim to stock parts locally, but we source what the job needs and keep turnaround tight. If your existing cap was made by someone else, that’s fine. We’ll inspect it, tell you if it’s still doing its job, and match or replace it only when it isn’t.
Common Chimney Cap & Crown Problems We See in Forest Hills Homes
- Factory-built chase caps clogged with pecan and live-oak litter. The heavy canopy over these roofs fills even a newer factory cap’s mesh screen each fall, and a screen packed solid chokes draft on a fireplace that otherwise looks fine.
- Hail-cracked mortar crowns on 1950s and 1960s masonry chimneys. Water wicks into the flue through cracks that hide behind an otherwise intact-looking cap, and the damage shows up inside long before it shows on the roof.
- Mismatched caps on original flue tile openings. An aftermarket cap that doesn’t match the tile lets rain, squirrels, and insects into a chase the manufacturer never designed for that hardware.
- Inserts dropped into original clay-tile flues. A factory-built insert bolted to a mid-century masonry flue creates a hybrid system, and the two parts need to be checked against different standards, not treated as one.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Forest Hills, TX
Cap and crown work here is priced per job, and the written estimate sets the final price. Typical ranges for Forest Hills: a standard cap installation runs $180 to $420 depending on flue size and cap style; a custom or multi-flue cap runs $350 to $800; crown repair runs $300 to $900 based on how much mortar has to come out; a crown coating runs $250 to $550. What moves the number is flue count, access, and whether the job uncovers liner damage that has to be handled first. We inspect before we price, so you’re never quoted on a guess. Estimates are free.
We Also Serve Cities Near Forest Hills
Cap and crown work reaches beyond Forest Hills into the surrounding neighborhoods. We also handle chimneys in Lochwood, White Rock, Casa View, and Lakewood, and the same inspection standard applies across all of them. If you’re just outside Forest Hills, call and we’ll confirm coverage. You can also see the full scope of what our chimney cap & crown team handles.
Serving Forest Hills, TX – Our Local Coverage Area
We serve Forest Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Forest Hills
Yes. A lightly used factory-built fireplace still needs an annual inspection, because the chase, cap, and screen can fail from weather and debris even when you rarely light a fire. In Forest Hills, the pecan and live-oak canopy over these roofs fills a factory cap’s screen every fall whether the fireplace gets used or not, and a clogged screen kills draft. Annual inspection catches that before it turns into a smoking firebox or a water problem. Call (833) 508-9984 for an exact quote. Estimates are free.
Smoke backing into the room on a small fire is usually a draft problem, and in Forest Hills the first thing we check is the cap and screen. A factory cap packed with leaves and twigs chokes the chase, and the firebox has nowhere to send the smoke. Clearing the cap and re-fitting a manufacturer-matched screen usually resolves it. Call (833) 508-9984 for an exact quote. Estimates are free.
Yes. A hail-cracked crown lets water into the flue, and over time that water degrades the clay tile underneath. The crown is the roof of the chimney, so once it cracks, the liner is taking on moisture every storm. In Forest Hills, that pattern is common on 1950s and 1960s masonry chimneys. We check the liner with a camera before we repair or coat a crown, so you can see exactly what’s happening in there. Call (833) 508-9984 for an exact quote. Estimates are free.
Yes. A multi-flue cap is often the right fit for an original clay-tile chimney with more than one opening, as long as the cap is measured to the actual tile spacing. We measure the top, then fit a multi-flue or custom cap that covers every opening with a screen sized for the litter on these roofs. That’s usually cleaner than stacking single caps. Call (833) 508-9984 for an exact quote. Estimates are free.
It’s worth it when the factory cap isn’t sealing or its screen keeps clogging. A custom cap built to the actual flue measurements closes the gaps a factory cap leaves and holds up better against the debris and storms here in Forest Hills. If your existing factory cap is doing its job, we’ll tell you to keep it. We only recommend a replacement when the evidence says it’s needed. Call (833) 508-9984 for an exact quote. Estimates are free.
What to Expect When You Call
The visit starts with an inspection, not a sales pitch. We look at the cap, the crown, the chase, and the flue, and we use camera inspection with a photo report as part of the process, so you see what we see. If the crown is sound and the cap just needs clearing, that’s what you’ll hear. If there’s a real problem up there, you’ll see it on camera before anything gets booked. Then you get a written estimate with a flat price agreed before the work starts. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
Contact Us for Chimney Cap & Crown in Forest Hills
Whether your cap is failing, your crown is cracking, or you just want a specialist to look at a factory-built fireplace nobody’s checked in years, call (833) 508-9984 for a free estimate. We’ll inspect the whole system, show you the evidence, and tell you plainly what needs doing now and what can wait. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lake Highlands.