Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Richardson, TX
We provide independent Gelco service across Richardson, working on gas log sets, inserts, and factory-built fireplaces every week in North Texas. The one thing that makes our Gelco work in Richardson different: most of these units sit inside fireboxes built decades before the logs arrived, so the job is usually a venting and clearance assessment, not just a sweep. We’re not affiliated with, authorized by, or endorsed by Gelco, and we don’t represent their warranty. Our technicians have up to 8 years of experience and read the data plate before touching anything. Call (833) 508-9984 to set up a free estimate.
Why Richardson Residents Choose Us for Gelco Service
Gelco equipment shows up in Richardson homes in a few recognizable forms: millivolt gas inserts from the 1980s and 90s retrofits, factory-built wood fireplaces with steel flues, gas log sets dropped into original masonry boxes, and the screen and glass-door fronts that go with them. We service all of it, and we’ve learned where each type fails here.
We read the data plate and pull the manufacturer’s clearance and venting specs before any work starts. That matters in older housing stock, where a firebox may have been modified by three owners and nothing matches the original installation manual anymore. You get documentation of what we find, so a repair-or-replace decision rests on evidence you can see, not on a pitch.
Scheduling is straightforward. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. Every price is set per job by a written estimate. When you need an independent Gelco service provider in Richardson, that’s the standard we hold to.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Richardson
These are the failure modes we run into most across Richardson. Each one has a local reason behind it.
- Standing-pilot assemblies that won’t stay lit. After nine idle summer months, thermocouples and thermopiles drift and pilot orifices collect dust on older Gelco gas inserts. It reads like a failed valve and usually isn’t. A proper service call tests the pilot circuit before anyone quotes a part.
- Cracked refractory panels and firebox brick in Gelco pre-fabs. DFW freeze-thaw swings do this. A hairline in the refractory isn’t cosmetic: it changes clearance-to-combustible requirements, and it can’t be patched over and called fixed. If the firebox itself is compromised, we’ll tell you replacement is the honest recommendation.
- Gas logs in unlined or undersized flues. This is the big one in original ranch homes. A Gelco log set dropped into a 1950s-60s masonry firebox without checking the flue vents poorly and raises carbon monoxide concerns, particularly where the chase is shared with an old furnace flue.
- Vent-free log sets in tight original homes. With no combustion-air provision, vent-free burners push moisture and CO into the living space. We assess the room and the venting, then recommend accordingly.
- Caps and terminations crushed or bird-nested. Nine idle months is plenty of time for a vent cap to fill with nesting or take storm damage. A blocked termination changes how the whole system drafts, and it’s one of the easier problems to catch early.
Gelco Service in Richardson: What Local Conditions Mean for Your Equipment
Most of the ranch fireplaces in the original Telecom Corridor blocks around 75080 and 75081 were built for wood. Many now hold gas logs. That single fact drives most of our Gelco work in Richardson: technicians regularly find Gelco gas inserts and log sets sitting in unlined or undersized original flues, and many of those chases are shared with the home’s old furnace flue. What would be a routine sweep becomes a venting and CO-safety assessment. North Texas summers make it worse, because the fireplace idles for nine months and creosote hardens while nests build behind a cap nobody looks at. Then a February freeze cracks mortar and spalls clay liners, and warm-up sends a wave of inspection calls. It’s a different picture than the newer 75082 subdivisions, where factory-built steel flue systems need light sweeping but very specific manufacturer clearances. Two worlds, two service approaches, and the right one starts with the correct inspection level.
Gelco Models & Products We Service in Richardson
We work on Gelco gas fireplace inserts, gas log sets, factory-built wood-burning fireplaces with steel flue systems, screen and glass-door fronts, and vent-free or vented log burners installed in original masonry fireboxes. On each call we identify the unit from its data plate, confirm the venting arrangement, and decide what the job actually needs.
For anything safety- or clearance-critical (refractory panels, glass, pilot assemblies, venting components), we use Gelco OEM parts. For commodity items like caps, dampers and gaskets, quality aftermarket parts are fine and often the better value. We’re an independent shop. We repair, install and service Gelco equipment with parts that fit it properly, and we don’t claim factory authorization of any kind.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Richardson
Every job is priced from a free written estimate, and the estimate sets the final price. What we can tell you up front is what drives it: inspection level (a Level 2 inspection with camera takes longer than a basic appliance service), whether the firebox or refractory shows damage, whether the flue needs evaluation as a shared chase, and how accessible the termination is. Older Gelco inserts with cracked refractory or a failed firebox are usually not worth rebuilding, and we’ll say so plainly instead of quoting a repair that won’t hold. Our technicians have up to 8 years of experience and will walk you through findings with photos before any work is agreed. Call (833) 508-9984 for an exact quote.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Richardson
Usually not. A gas log set in an original masonry box needs the flue checked, and in many 75080 and 75081 homes the chase is shared with an old furnace flue. A Level 2 inspection with camera is the right starting point. Call (833) 508-9984 for a free estimate.
Most often it’s thermocouple or thermopile drift plus a dirty pilot orifice, not a failed valve. Nine idle months in Richardson heat is enough for both. We test the pilot circuit before quoting parts. Call (833) 508-9984 to book it.
No, not safely. A cracked refractory changes clearance-to-combustible requirements, and cosmetic patching doesn’t restore them. We use Gelco OEM panels where the box is sound, and recommend replacement where it isn’t. Call for an assessment.
Get it inspected before the next burning season. Freeze-thaw cycles like that one spall clay liners and crack mortar on older Richardson masonry chimneys, and the damage isn’t visible from the ground. A Level 2 inspection with camera shows you what’s there. Call (833) 508-9984.
No, it’s a different service. Factory-built steel flue systems in the newer planned subdivisions need light sweeping but strict manufacturer clearance checks, which means we confirm the model and venting specs from the data plate first. Call (833) 508-9984 to set it up.
It depends on the inspection level and what we find, so the estimate is the number that counts. The estimate itself is free. Call (833) 508-9984 for an exact quote.
Service Areas Near Richardson
We also work on Gelco equipment in nearby Lake Highlands, and further out in Sachse, Rowlett, White Rock, Lochwood and Forest Hills. If you’re just outside Richardson and want the same inspection-led approach, call and we’ll confirm the details for your address.
Book Your Gelco Service in Richardson Today
Whether it’s a gas log set that hasn’t burned cleanly since last winter or a pre-fab that needs its clearance checked, we’ll start with a proper inspection and a free written estimate. Call (833) 508-9984. We answer 24/7, with fast dispatch from 7am to 7pm. Put the right inspection level on the job and everything else follows.
Written by the team at Chimney Sweep Lake Highlands.