Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Lochwood
If your fireplace is smoking into the room, your pilot won’t stay lit, or your damper is stuck, we can help. Chimney Sweep Lake Highlands handles fireplace repair across Lochwood, and we know these homes well: the single-story brick ranches, the original masonry fireplaces, the gas logs and inserts added decades after the house was built. That history matters because it determines what actually fails. Call (833) 508-9984 and we’ll book a visit, answer your questions, and give you a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Lochwood Homeowners Call Chimney Sweep Lake Highlands for Fireplace Repair
Chimney work is all we do. That focus is why a Lochwood homeowner with a smoking insert gets a technician who reads flue sizing for a living, not a generalist fitting a fireplace in between HVAC calls. Our technicians have up to 8 years of experience, and every job runs through the same inspection-first sequence: we find the cause before anyone quotes a repair.
We work with a curated roster of professional-grade brands the chimney trade trusts, including DuraFlex, HeatShield, and Copperfield, so repairs and relines are matched to the appliance and flue in front of us. When a Lochwood ranch needs a stainless liner rather than a patch, we can do that work without handing you to a subcontractor. From the firebox to the cap, the full scope stays with one company.
Response time to Lochwood is straightforward. We book visits across the neighborhood and the surrounding East Dallas pocket, and we’ll give you a clear window when you call. The estimate is free, and a written estimate sets the final price before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Lochwood
Fireplace Insert Service in Lochwood
Inserts are everywhere in Lochwood, and they’re usually the source of the trouble. Original clay flues were sized for open masonry fireplaces, then an aftermarket insert or gas log set went in without resizing the flue. That mismatch is why we start insert service with a camera inspection of the flue and the smoke chamber before recommending anything. Often the fix is a correctly sized stainless liner from DuraFlex paired with a new cap.

Wood Burning Fireplace Repair in Lochwood
Wood burning fireboxes in these 1950s and 1960s homes carry decades of heating cycles, and the mortar joints show it. We repair cracked firebrick, deteriorated mortar, and damaged dampers, and we check the smoke shelf and chamber for the spalling that comes with heavy use. If a homeowner is burning wood as a primary heat source, we also talk through burn practice, because how the fire is run changes how fast creosote builds.

Damper Repair in Lochwood
A damper that won’t open fully or seal tightly is one of the most common reasons a Lochwood fireplace smokes or leaks cold air when it’s idle. We repair or replace dampers and confirm the whole assembly moves as it should. It’s a small part of the system that has an outsized effect on draft.

Firebox Repair in Lochwood
Firebox repair addresses the interior masonry: cracked brick, loose mortar, and heat-damaged panels. Left alone, those cracks let moisture and heat reach the chimney structure behind them. We assess the firebox alongside the flue, because on these older masonry fireplaces the two problems usually travel together. Sometimes a resurfacing with HeatShield is the right answer; sometimes the firebox is sound and the issue is further up.
Trusted Brands We Service in Lochwood
We work with DuraFlex liner systems, HeatShield flue resurfacing, Olympia Chimney components, and Copperfield supplies because those are the materials professional chimney contractors rely on. We don’t claim to stock parts locally; what we do is specify the right component for your appliance and flue, then source and install it. That approach keeps turnaround reasonable and means the repair is built to fit your chimney rather than the closest shelf item. If you’ve been told you need a liner, we’ll show you the camera evidence and explain why the material we recommend is the right grade for a wood insert or gas log set.
Common Fireplace Repair Problems We See in Lochwood Homes
- Third-degree creosote glaze in over-sized clay flues. When wood is a primary heat source, creosote builds fast, and a cold, over-sized clay flue never gets hot enough for a clean burn. That combination produces glazed creosote that a standard sweep can’t remove.
- Cracked 1950s clay tile behind unlined gas-log retrofits. Decades of heating and cooling cycles crack the original tile, and an unlined retrofit lets moisture and creosote reach the chimney structure. This is the classic East Dallas setup that fails a Level 2 inspection and calls for a stainless liner.
- Leaf- and twig-packed caps under the pecan and oak canopy. The mature trees over Lochwood fill caps and obstruct flues every fall. The result is poor draft and smoke spilling into the room on the first fire of the season.
- Spalling mortar in aging fireboxes. The North Texas heat and humidity let fireplaces sit idle for months, so soot, creosote, and moisture accumulate between burns and work at the mortar joints.
Here’s the local condition that ties these together, and it’s specific to Lochwood. The 1950s clay-tile flues here were sized for open masonry fireplaces, then paired with aftermarket gas logs or inserts years later. The flue ends up over-sized and unlined for whatever appliance now sits in the firebox. That’s not a cosmetic mismatch; it’s the exact condition that fails a Level 2 inspection and pushes a homeowner toward a stainless liner instead of a simple sweep. Add the heavy tree canopy overhead and the long idle season, and you get a chimney that drafts poorly and collects debris faster than the house across town with a clear roofline and a modern flue.
In a typical Lochwood ranch, a homeowner lights a wood insert for the first cold snap and gets smoke rolling into the room instead of going up the flue. Often it traces to a cold, over-sized clay flue, a leaf-packed cap under the pecan canopy, or a damper that no longer opens fully. A qualified technician runs a Level 2 inspection with a camera, checks the firebox and smoke chamber for spalling mortar and cracked tiles, and usually recommends a correctly sized stainless flue liner with a new cap, then talks through burn practice to slow creosote buildup.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Lochwood, TX
Fireplace repair pricing depends on what the inspection finds, but we can give you honest ranges for this market. A typical damper repair in Lochwood runs $150 to $350. Firebox repair, including masonry patching or resurfacing, typically runs $400 to $1,200, and a HeatShield resurfacing sits in the upper part of that range. Insert service and liner work run higher: a correctly sized stainless flue liner with a new cap typically runs $1,800 to $4,000 depending on flue length and configuration. Gas log and pilot repairs usually run $150 to $400. The written estimate sets the final price, and the estimate itself is free. If work can safely wait, we’ll tell you.
We Also Serve Cities Near Lochwood
Lochwood sits in a pocket of East Dallas where the housing stock and the trees are similar from block to block. We also serve homeowners in Forest Hills, White Rock, Casa View, and Lakewood, and the same inspection-first approach applies across the area. If you’re just outside Lochwood, call and we’ll confirm coverage. Our fireplace repair team serves the whole neighborhood.
Serving Lochwood, TX – Our Local Coverage Area
We serve Lochwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Lochwood
A Lochwood fireplace used as a primary heat source should be swept more often than the once-a-year rule of thumb suggests, and the over-sized clay flues common here make it worse. When wood is the main heat, creosote loads faster and the cold flue promotes glaze. We recommend an annual inspection and a sweep interval set by what the camera finds, not a calendar. Call (833) 508-9984 for an exact quote; estimates are free.
Smoke spilling into the room usually points to an over-sized cold flue, an obstructed cap, or a damper that isn’t opening fully. Under Lochwood’s pecan and oak canopy, a leaf- and twig-packed cap is a frequent culprit. A Level 2 inspection with a camera tells you which one it is. Call (833) 508-9984 for an exact quote; estimates are free.
An inspection on a 1950s Lochwood ranch with gas logs typically finds an unlined, over-sized clay flue with cracked tiles from decades of heating cycles. That’s the classic East Dallas retrofit condition, and it usually fails a Level 2 inspection. The fix is often a correctly sized stainless liner and a new cap. Call (833) 508-9984 for an exact quote; estimates are free.
Firebox repair fixes the interior masonry: cracked brick, loose mortar, damaged panels. A reline addresses the flue itself, and on a 1950s Lochwood chimney with cracked clay tile behind an unlined gas-log retrofit, the flue is usually the failing part. The inspection tells you which scope you need. Call (833) 508-9984 for an exact quote; estimates are free.
They do, and the reason is the long idle season. North Texas heat and humidity let soot, creosote, and moisture accumulate between burns, which corrodes pilot assemblies and stiffens dampers. That’s why a fireplace that worked last winter can fail to light or seal the next. Call (833) 508-9984 for an exact quote; estimates are free.
Book Fireplace Repair in Lochwood
If your fireplace isn’t drafting, your firebox is cracked, or your insert needs a look, we’re ready to help. We handle the full scope from the firebox to the cap, using materials the chimney trade trusts, including DuraFlex, HeatShield, and Copperfield, and we show you the camera evidence before recommending work. Call (833) 508-9984 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lake Highlands.