Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Lake Highlands?
Chimney cap installation in Lake Highlands typically runs $250 to $650, while crown repair or rebuilding usually falls between $400 and $1,400 depending on the size of the chimney and how much masonry needs replacing. A single job combining both – a new cap and a rebuilt crown – commonly lands in the $700 to $1,900 range. These are estimates for a typical Lake Highlands ranch or mid-century home, and the written estimate we provide after looking at your chimney sets the final price.
Few things matter more to a chimney in North Texas than what sits on top of it. The cap and crown are the chimney’s first line of defense against rainwater, and when either one fails, water works its way into the masonry and flue. We handle the full scope, from the firebox to the cap, so nothing gets missed.
Key Takeaways
- Cap installation: about $250 to $650, depending on style and flue count.
- Crown repair: about $400 to $1,100. Full crown rebuild: about $700 to $1,400.
- Cap and crown together: roughly $700 to $1,900 on a typical home.
- Water intrusion is the leading cause of chimney damage, and the cap and crown are where it usually starts.
- Estimates are free. Call (833) 508-9984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down for Lake Highlands homes. These ranges cover labor and materials together, since cap and crown work is almost always quoted as a complete job rather than by the hour.
| Service | Typical Cost Range | What’s Included |
|---|---|---|
| Single-flue cap (standard) | $250 – $450 | Galvanized or stainless cap, mesh screen, mounting hardware |
| Multi-flue cap | $400 – $650 | Larger footprint cap sized for two or more flues |
| Custom or heavy-gauge stainless cap | $500 – $750 | Fabricated cap sized to an irregular chimney top |
| Crown repair (crack patching, sealing) | $400 – $800 | Cleaning, crack repair, flexible crown coating |
| Crown rebuild (masonry) | $700 – $1,400 | Removing failed crown, forming and pouring a new overhang |
| Cap and crown combined | $700 – $1,900 | Full top-of-chimney rebuild with new cap installed |
| Chimney inspection (to assess cap and crown) | $150 – $350 | Level I or Level II inspection, photo report of findings |
What pushes a job toward the top of these ranges? Masonry that’s broken down further than it looked from the ground, a crown that has to be rebuilt rather than patched, and a custom cap fabricated for an odd chimney shape. What keeps a job at the bottom? A crown with minor hairline cracks that can be sealed, and a standard cap on a single flue. On a Lake Highlands ranch home with one chimney, the combined cap and crown job often comes in near the middle of the range.
What Affects Chimney Cap & Crown Pricing in Lake Highlands
Lake Highlands homes have some specific characteristics that shape what this work costs. Most of the neighborhood was built out in the mid-20th century, and the chimneys that came with those homes are now old enough that crown failure is common. Here’s what drives the number up or down.
- Age and condition of the crown. A crown that has minor cracking can be cleaned and resurfaced. One that has crumbled or pulled away from the flue has to be rebuilt. That’s the biggest single swing in pricing.
- Number of flues. A chimney serving both a fireplace and a furnace flue needs a larger cap, and larger caps cost more to fabricate and install.
- Cap material. Galvanized caps are the budget option and work fine. Stainless caps cost more, but they hold up better against the heat and the Dallas-area weather over the long haul.
- Masonry condition around the crown. If the brick at the top of the chimney has spalled or the mortar joints have washed out, that repair gets added to the crown job. Patching brick before a crown rebuild is common.
- Roof pitch and access. A steep roof or a chimney tucked behind a dormer makes the job slower. Steeply pitched roofs are common in the older parts of Lake Highlands.
- Whether the chimney flashes are sound. Leaks that look like they come from the crown sometimes trace back to the flashing where the chimney meets the roof, so it pays to check both while we’re up there.
We work with the materials the chimney trade trusts, including Gelco and Famco cap products, Olympia Chimney components, and Copperfield supplies. Using recognized brands means the cap that goes on your chimney is one a future inspector will recognize and know how to service.
How to Save on Chimney Cap & Crown
The biggest savings on cap and crown work comes from catching problems early. A crown with small cracks is a repair job. Leave it through a few more rainy seasons and it becomes a full rebuild. Here are practical ways to keep the cost down.
- Get an inspection before the leak starts. A routine inspection is the cheapest line item on the list, and it’s how we find a failing crown before it has had a chance to let water into the masonry.
- Fix the crown while the cap is off. If you’re having a new cap installed anyway, repairing the crown in the same visit saves on setup and access. We bundle the work into one appointment whenever it makes sense.
- Choose stainless over galvanized if you plan to stay. The price difference is real, but it’s one installation instead of two.
- Don’t let the chimney stay capped with a rusted mesh. A clogged or rusted screen doesn’t let the chimney breathe, and it lets moisture sit. Replacing the screen is a small add-on when it’s done during other work.
- Get a written estimate and compare apples to apples. Chimney cap size, material, and crown scope vary. The cheaper quote often leaves something out. Estimates from us are free, and we’ll explain exactly what’s included – call (833) 508-9984.
One word of caution on the DIY side: the top of a chimney is a roof-height job, and steep Lake Highlands roofs are no place to be working near a flue opening alone. Cap and crown work involves heights, masonry, and occasionally heat-related components. A trained professional who does this every day is the right call. That’s true whether you’re having a new cap installed or having us take a look at something that looks off. Our technicians have up to 8 years of experience with chimney work specifically – not general handyman work – and chimney cap & crown work is one of our core services.
Which Cap Style Is Right for a Lake Highlands Chimney?
The three styles we install most in Lake Highlands are the standard single-flue cap, the multi-flue cap, and the custom-fabricated cap. Your choice comes down to how many flues your chimney has, how irregular the top of the chimney is, and how much you want to spend.
The single-flue cap fits a chimney with one flue. It’s a metal hood with a mesh screen on the sides, and it sits on a bracket or legs that keep it lifted above the flue opening. It’s the most common cap in the neighborhood, and it costs the least. The multi-flue cap covers a wider top. Some Lake Highlands chimneys serve both a fireplace and a furnace, and those need a cap sized to cover both openings. Custom caps are for chimneys with nonstandard dimensions – older homes in the area sometimes have a chimney top that doesn’t match a stock size. We fabricate these using Copperfield and Gelco components, so the fit is right and the cap isn’t hanging off the chimney in a windstorm.
The question of which style is right is worth asking during an inspection – and the answer usually comes down to how the chimney was built, not a preference. Our chimney inspection service uses Level I, II, and III inspection types as the framework, and a Level I inspection is usually enough to size a cap and check a crown. Call (833) 508-9984 for a free estimate, and we’ll take a look before you commit to anything.
What Causes a Chimney Crown to Fail in Lake Highlands?
Most Lake Highlands crowns fail for three reasons: age, weather, and the way the crown was built to begin with. The crown is the concrete or mortar slab that tops the chimney and sheds water off the sides. It’s exposed to the sun, the wind, and every rainstorm that rolls through Dallas.
Over time, the crown cracks. Small hairline cracks are usually harmless. But when the crown pulls away from the flue or the crown’s underside crumbles, water gets into the masonry and into the flue lining, and that’s where trouble starts. The first sign is often a rusted damper, a water stain on the firebox, or a chimney that smells musty when it’s not in use. In a Dallas-area home, that failure matters because a cracked crown does its worst work during heavy spring rain rather than in the winter. A wet chimney needs to dry out, and a chimney that’s been soaking through a cracked crown takes a long time to dry, which can lead to interior damage.
A proper crown rebuild includes removing the old crown, making sure the top of the chimney is sound, pouring a new crown with a molded overhang, and sealing it. The cap goes on top. Together, a crown and a cap are the most effective protection against water damage your chimney has. That’s why we treat cap and crown work as preventive care, not just repair.
What Does Chimney Cap Repair Cost – and Can You Come Today?
Chimney cap repair in Lake Highlands usually costs $150 to $400 if the cap can be repaired in place. A cap that’s been blown loose or knocked askew in a storm is often a re-seating job. A cap that has rusted through needs replacement, and that falls into the installation range of $250 to $650.
We offer same-day service when scheduling allows, and our fast dispatch from 7am to 7pm runs Sunday through Friday. If you call outside dispatch hours, a call is booked into the next opening, Sunday through Friday, 7am to 7pm. To get an exact quote, call (833) 508-9984 – estimates are free. If you’d rather read more first, our page on chimney cap & crown service explains what the work involves.
Chimney Cap & Crown Cost FAQs
How much does chimney cap installation cost in Lake Highlands?
Chimney cap installation in Lake Highlands typically runs $250 to $450 for a standard single-flue cap and $400 to $650 for a multi-flue or custom-fabricated cap. Stainless caps sit at the higher end, galvanized at the lower end. Call (833) 508-9984 for a free estimate based on your chimney.
How much does it cost to fix a cracked chimney crown in Lake Highlands?
Repairing a cracked crown in Lake Highlands generally costs $400 to $800 when the crown can be patched and sealed. A crown that needs to be rebuilt runs $700 to $1,400. The difference between repair and rebuild comes down to whether the crown is still structurally sound. Call (833) 508-9984 and we’ll tell you which one your chimney needs.
Is it cheaper to repair or replace a chimney cap?
Repair is cheaper when the cap can be re-seated – usually $150 to $400 instead of $250 to $650 for a new cap. If the cap is rusted through, or the screen is broken and the mounting legs have rusted, replacement is the better value. Call (833) 508-9984 and we’ll give you an honest answer on which one makes sense.
Do I need a chimney inspection before getting a cap and crown quote?
An inspection isn’t required before we quote, but it’s usually the right first step. A Level I inspection runs $150 to $350 and tells us the condition of the crown, the flue, and the cap’s mounting points. We can often quote from a PhotoReport without a second visit. Call (833) 508-9984 to schedule.
Why does cap and crown work cost more on some Lake Highlands homes?
Costs run higher when the crown needs a full rebuild, when the chimney has multiple flues, and when the masonry around the crown needs repair. Steep roof pitches and tight roof access add labor. The written estimate is what sets the final price – call (833) 508-9984 and we’ll spell out exactly what your chimney needs.
Why Choose Chimney Sweep Lake Highlands for Cap and Crown Work?
Chimney work is all we do, which means every job gets a specialist, not a generalist. Cap and crown work is our specialty, and we handle the full scope – sweeping, inspection, cap and crown, fireplace repair, and structural chimney repair – so one company handles discovery-to-resolution without handing you off to a subcontractor for each part. We use professional-grade brands including DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco, and Copperfield. If your crown repair reveals a deteriorated flue liner, we can resurface with HeatShield or reline with DuraFlex – services many sweep-only companies can’t provide.
Chimney Sweep Lake Highlands is where you’ll find the full range of services if you want to read about repair, sweeping, and inspection together. Cap and crown calls are a big part of what we’re called out for, and we treat them as preventive care. Protect your home from the top down. A chimney inspection isn’t a formality – it’s how we find small problems before they become expensive ones.
Contact Us for a Free Chimney Cap & Crown Estimate
If your chimney has a cap that’s seen better days, or a crown with cracks you’d like someone to look at, call (833) 508-9984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We serve Lake Highlands and the surrounding area, and the estimate is free. The price is set per job by the written estimate, so you’ll know the number before we start.
Pricing reflects the Lake Highlands market as of 2026. Chimney Sweep Lake Highlands offers free estimates – call (833) 508-9984.
Written by the team at Chimney Sweep Lake Highlands.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jodi Brooks"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Tim Doyle"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Cole Sutton