Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Lake Highlands?
Expect to pay roughly $1,800 to $4,800 for a chimney liner rebuild in Lake Highlands using a stainless flexible liner system, and $3,500 to $14,000 or more for a partial or full masonry chimney rebuild, depending on how far the damage runs. A HeatShield flue resurfacing job, which repairs a damaged liner in place rather than replacing it, usually lands between $1,100 and $2,400. These are typical ranges for our market in 2026; the written estimate after an inspection sets the final price.
Chimney work is all we do, so the scope runs from the firebox to the cap and nothing gets handed off. That matters on a liner or rebuild job, where a small missed defect in the crown or the flue can undo the repair a season later. Call (833) 508-9984 for a free estimate.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items break out for Lake Highlands homes. A rebuild is rarely a single charge; it’s a set of components that add up once we’ve opened the chimney and seen what’s behind the masonry.
| Line item | Typical range (2026) |
|---|---|
| Stainless flexible liner, single-flue installation | $1,800 – $4,800 |
| Insulated liner upgrade (for gas appliances or extra protection) | $400 – $1,100 added |
| HeatShield flue resurfacing (repair in place) | $1,100 – $2,400 |
| Crown rebuild or replacement | $450 – $1,400 |
| Chimney cap (Gelco, Famco, or Copperfield) | $180 – $650 |
| Partial masonry rebuild (upper chimney, above roofline) | $3,500 – $8,000 |
| Full masonry rebuild (ground to crown) | $8,000 – $14,000+ |
| Firebox and damper repair during a liner job | $300 – $1,200 |
| Level II or Level III inspection (camera or full-scope) | $150 – $550 |
What pushes a job toward the top of those ranges? Length and layout of the flue, the condition of the masonry above the roofline, whether an insulated liner is needed, and how much of the existing chimney can be saved. A liner replacement on a sound chimney with a serviceable crown is a modest job. A rebuild on a chimney that’s been taking on water for years is not, because water damage spreads down through the mortar joints and the inner wythe. The single biggest cost driver we see is water intrusion that went unaddressed. A $450 crown repair today is what keeps you out of the five-figure rebuild column later.
Brands matter for durability as much as price. We use DuraFlex and Olympia Chimney flexible liner systems, HeatShield for flue resurfacing, and Gelco, Famco, and Copperfield for caps and crown materials. These are the names the chimney trade trusts, not commodity parts pulled off a shelf. If you want the full picture of how a liner and rebuild scope come together, see our page on chimney liner & rebuild.
What Affects Chimney Liner & Rebuild Pricing in Lake Highlands
Two chimneys on the same block can come in at very different prices. Here’s what actually moves the number.
- Flue size and liner length. A tall two-story chimney in Lake Highlands needs more liner than a shorter one, and the price scales with the footage. A flue that’s been relined before may also need the old liner removed first, which adds labor.
- Masonry condition above the roofline. The top of the chimney gets hit hardest by the sun and rain. Cracked mortar, spalling brick, and a failed crown are the usual reasons a simple reline turns into a rebuild. Newer subdivisions north of Northwest Highway tend to have chimneys that are more weather-exposed on open lots; older homes closer to White Rock often show more years of wear.
- Water intrusion history. A missing or broken cap lets rain straight down the flue. If that’s been happening for a couple of seasons, the interior can be badly degraded and the fix is bigger. Caught early, a cap replacement handles it.
- Liner material and insulation. Single-wall stainless is the entry option. Insulated liners cost more but keep the flue warmer and protect the masonry, which is often worth it on gas appliances or a flue that runs on an exterior wall.
- Access and roofline. A steep roof pitch, a chimney boxed in against the roof, or limited access for staging adds labor time. Lake Highlands has a mix of one- and two-story homes with varying roof lines, and access is part of every estimate.
- Type of inspection needed. A standard Level I inspection is fine for a clean, well-maintained chimney. If there’s been a chimney fire, a recent liner concern, or a change of appliance, a Level II or Level III inspection with a camera is warranted, and that cost sits on top of the repair.
How to Save on Chimney Liner & Rebuild
The real savings in chimney work come from timing, not from shopping for the lowest bid. A repair caught early is always cheaper than a rebuild caught late.
- Fix the crown and cap before the flue fails. Crown and cap work is the most common source of water damage in a chimney, and it’s also among the cheapest line items. Handling a cracked crown or a missing cap now prevents the interior damage that drives a rebuild later.
- Get a proper inspection first. An inspection isn’t a formality. It’s how we find small problems before they become expensive ones. Skipping it to save $150 to $550 can mean paying for a rebuild you didn’t need to.
- Ask whether resurfacing will do the job. If the flue liner is deteriorated but the chimney structure is sound, HeatShield resurfacing at $1,100 to $2,400 can restore it without the cost of a full reline. Not every chimney qualifies, but it’s worth asking.
- Bundle the liner and crown in one estimate. If the crown needs work anyway, doing it alongside a liner job means one setup and one mobilization rather than two. Expect a better overall number when the scope is combined.
- Compare written estimates, not verbal ballparks. The written estimate is the price. Make sure each quote lists the same line items so you’re comparing the same work.
We offer free estimates, so getting a real number for your chimney costs nothing but the call. Call (833) 508-9984 and we’ll walk through what you’re seeing.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Lake Highlands?
A stainless flexible liner installation in Lake Highlands typically runs $1,800 to $4,800, with insulated liners costing $400 to $1,100 more. The written estimate sets the final price. Call (833) 508-9984 for a free quote – estimates are free.
Is it cheaper to reline or rebuild a chimney?
Relining is almost always cheaper: a liner at roughly $1,800 to $4,800 against a partial rebuild at $3,500 to $8,000 or a full rebuild at $8,000 to $14,000+. The deciding factor is whether the masonry itself is sound. If it’s not, a liner alone won’t hold. Call (833) 508-9984 for an inspection that tells you which applies.
How much does chimney resurfacing cost in Lake Highlands?
HeatShield flue resurfacing typically costs $1,100 to $2,400 in Lake Highlands, depending on the length and condition of the flue. It repairs a deteriorated liner in place when the structure is still sound. Call (833) 508-9984 to find out whether your chimney qualifies.
Do I need a liner if I have a gas fireplace?
Yes, a properly sized liner is required for most gas appliances, and it usually costs $1,800 to $4,800 for the liner plus $400 to $1,100 for insulation. Gas flues need the right diameter and protection, so sizing isn’t optional. Call (833) 508-9984 for a free estimate.
How much does a chimney rebuild cost in Lake Highlands?
A partial rebuild above the roofline runs $3,500 to $8,000, and a full ground-to-crown rebuild runs $8,000 to $14,000+. Masonry condition, height, and access all move the number. Call (833) 508-9984 for a written estimate.
Getting a Real Number for Your Chimney
Liner and rebuild pricing in Lake Highlands depends on what’s actually there, and no honest company can quote from a photo or a description alone. We handle the full scope from the firebox to the cap, using materials the chimney trade trusts, including DuraFlex, HeatShield, and Copperfield. That means the inspection, the liner, the crown, and any masonry repair stay with one specialist rather than getting split across a generalist crew.
Our technicians have up to 8 years of experience, and every job is handled by a chimney specialist. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re seeing a cracked crown, a damaged cap, or you’re not sure about the flue, the cheapest next step is a free estimate. Call (833) 508-9984 for a free estimate and a written price before any work begins. For the full range of what we do, start at Chimney Sweep Lake Highlands.
Pricing reflects the Lake Highlands market as of 2026. Chimney Sweep Lake Highlands offers free estimates – call (833) 508-9984.
Written by the team at Chimney Sweep Lake Highlands.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jodi Brooks"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Tim Doyle"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Cole Sutton