Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across University Park
If your chimney crown has a hairline crack or your cap has worked loose, you’re looking at a leak that gets worse with every North Texas rain. We install, replace, repair and coat caps and crowns for homeowners throughout University Park, and we treat the town’s mix of original 1920s masonry and modern replacement homes as two different jobs, because they are. Call (833) 508-9984 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why University Park Homeowners Call Chimney Sweep Lake Highlands for Chimney Cap & Crown
Chimney work is all we do. Every technician who shows up in University Park is a chimney specialist, not a generalist crew rotating through gutters and siding on the side. Our technicians have up to 8 years of experience, and they know the block-by-block rhythm of this town: a 1930s Tudor with its original clay-tile flue standing next to a much newer build with a factory-made fireplace system.
That matters when we quote cap and crown work. A crown sized for an original brick chimney and a cap sized for a modern direct-vent flue are not the same product, and the homeowner who schedules us expects us to tell the difference on sight. We work with materials the chimney trade trusts, including Gelco and Famco caps, Olympia Chimney components and Copperfield supplies, and we handle the full scope from the flue to the crown so nothing gets handed off. Nothing gets recommended without evidence you can see: we show you the crack, the rust, the missing overhang, and we tell you plainly when a repair can safely wait a season.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in University Park
Cap Installation
A correctly sized cap keeps rain, birds and squirrels out of an idle flue, and in University Park that idle flue matters. Because the fire season here is short bursts during hard freezes and holiday weeks, a chimney can sit open and unused for months, which is exactly when nests get built. We fit caps to the flue’s actual dimensions, not a one-size approximation.

Cap Replacement
Most University Park cap replacements we quote are for caps that loosened at the fasteners or rusted through after years of weather exposure with almost no fire in the box. A cap that has shifted no longer seals, and water finds the gap. We match the replacement to the chimney it sits on, whether that’s original masonry or a modern replacement home’s prefab system.

Crown Repair
The crown is the concrete or mortar cap at the very top of the chimney, and its job is to shed water away from the brick below. On University Park’s older homes, decades of freeze-thaw cycling have often stripped the overhang or opened hairline cracks that let water track straight down to the flue liner. Proper crown repair rebuilds that slope and overhang so water leaves the chimney instead of entering it.

Crown Coating
When the crown is cracked but still structurally sound, a flexible coating can seal those cracks and buy years before a full rebuild. It’s a sensible middle path for many of the original brick chimneys around town. We tell you honestly when coating is enough and when the crown has gone too far for anything but repair.
For the full range of what we do beyond this town, see our Chimney Cap & Crown service page.
Trusted Brands We Service in University Park
We work with professional-grade product lines the chimney trade relies on, including Famco, Olympia Chimney and Copperfield, plus DuraFlex liner systems when a cap or crown job turns up a liner problem underneath. Using materials a specialist recognizes matters in a town where a chimney may be eighty years old or eight. We don’t stock parts in a warehouse or claim to; we source what the job needs and turn the work around without a long wait. When the right fix means a specific cap style or a factory-matched component, we order it and schedule the install.
Common Chimney Cap & Crown Problems We See in University Park Homes
This is a nearly built-out, high-value town where tear-down rebuilds are the norm, which means a technician here regularly works on two very different chimneys on the same street. The failures follow that split.
- Cracked crowns on original 1920s-40s brick. Years of short, intense winter burns followed by long idle, weather-exposed months leave original masonry crowns with hairline cracks and spalling. Water reaches the flue liner and firebox, and the damage compounds each freeze.
- Loose or undersized caps on idle flues. An unused chimney is an open door for birds and squirrels. When a nest blocks the flue, the first cold-weekend fire smokes back into the room instead of drawing up.
- Generic caps on modern prefab and gas-insert flues. Replacement homes often get a cap that doesn’t match the factory-built system it covers, which leads to premature rust and poor venting. The cap has to be right for the appliance, not just the roofline.
- Two architectural eras on one block. An original Tudor’s chimney crown and the crown on the new build beside it fail differently and need different fixes. Matching the right method to each is the whole job.
On a typical older University Park home, the usual pattern is a clay-tile flue and brick crown showing hairline cracks and spalling after decades of thermal cycling. A qualified local pro often finds the existing cap has loosened or the crown has lost its overhang, letting water track down the liner. The usual fix is a poured or coated crown with proper flashing and a correctly sized multi-flue or custom cap, followed by a Level 2 inspection to confirm the liner and smoke chamber are sound. We handle that whole sequence, from the discovery to the resolution, without referring you out.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in University Park, TX
Pricing is set per job by a written estimate, and the ranges below are typical for University Park’s market, not a final quote. A typical cap installation in University Park runs $275 to $650, with a custom or multi-flue cap at the higher end. Cap replacement usually runs $225 to $550, depending on access and the flue’s dimensions. Crown repair, where the overhang and slope are rebuilt, typically runs $450 to $1,100. Crown coating, the lighter option for a cracked but sound crown, runs $300 to $700. Access, roof pitch and the number of flues move the number. Every estimate is free, and the written estimate sets the final price.
We Also Serve Cities Near University Park
We work across the neighborhoods surrounding this town, including Preston Hollow, Bluffview, East Dallas and Highland Park, and homeowners in each get the same specialist cap and crown service. If you’re nearby and your crown or cap needs attention, we cover those areas the same way we cover University Park. Call (833) 508-9984 to book a free estimate.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in University Park
Yes, an original 1930s brick chimney needs a crown built for solid masonry, not the prefab system a new build uses. The older crown usually needs a poured or rebuilt concrete crown with a proper slope and overhang, while a modern replacement home needs a cap matched to its factory-built flue. We assess which era of chimney you have and specify the right fix. Call (833) 508-9984 for an exact quote; estimates are free.
Because a barely used chimney sits idle and weather-exposed most of the year, and that’s what wears a cap out. North Texas’s mild winters mean short, intense burns during hard freezes and holiday weeks, so the cap takes rain, sun and freeze-thaw with very little fire in the box to keep it dry. Rust and loosened fasteners follow. We can replace a failing cap and match it to your flue. Call (833) 508-9984 for a free estimate.
Often, yes. A correctly sized custom cap keeps nests and debris out of an idle flue, and a blocked flue is a common reason a first cold-weekend fire smokes back instead of drawing. When we inspect, we check venting, the damper and the flue for the odd bird or squirrel nest before we recommend a cap. If the draft problem is elsewhere, we tell you. Call (833) 508-9984 for an exact quote; estimates are free.
Crown coating seals a crown that’s cracked but still structurally sound, while crown repair rebuilds the slope and overhang when the crown has genuinely failed. Coating is the lighter, lower-cost option and buys years on a sound crown; repair is what an original brick crown needs once water is getting past it. We show you which one your chimney calls for. Call (833) 508-9984 for a free estimate.
Yes, gas and gas-log fireplaces still have a flue and a cap that need to be right for the system. Because many University Park fireplaces are gas or gas-log rather than wood-burning, we spend as much time checking venting and dampers as we do on creosote, and a generic cap on a factory-built flue can rust early or vent poorly. Call (833) 508-9984 for an exact quote; estimates are free.
Book Your Chimney Cap & Crown Estimate in University Park
Whether you’re in an original Park Cities house or a newer replacement home off Lovers Lane or Preston Road, a cracked crown or a loose cap is worth a look before the next hard freeze. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can wait. Call (833) 508-9984 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lake Highlands.