Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Highland Park, TX
We provide independent Gelco service across Highland Park, from multi-flue caps on Tudor chimneys to top-mount dampers in Colonial fireplaces. What sets our Gelco work apart here is documentation: we photograph and record every Gelco component we remove or install, because Highland Park’s design-review process can ask about exterior changes years later. Chimney work is all we do, and on Highland Park’s historic masonry that matters. Call (833) 508-9984 to book a sweep or inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Highland Park Residents Choose Us for Gelco Service
Gelco components turn up on a lot of the chimneys we open up around Highland Park, and we’ve learned how they age in this particular housing stock. A Gelco cap that has held up fine somewhere else can be loose on a 1930s brick stack where the original lime mortar has softened underneath it. That’s the kind of thing we check on every visit, not just when you call about a leak.
We’re an independent provider. We aren’t authorized by Gelco and we don’t speak for the manufacturer. What we bring is familiarity: we service the same product families week after week, we keep quality parts that fit them, and we tell you plainly when a component needs replacing versus when it has another decade in it. Our technicians have up to 8 years of experience, all of it on chimney systems rather than general handyman call-outs. Scheduling is straightforward: we book a window, we show up, and we walk you through what we found before anything else happens.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Highland Park
The Gelco issues we run into here tend to follow the local weather and the age of the brick. A few patterns show up again and again:
- Rusted mounting flanges on multi-flue caps. Gelco multi-flue caps sitting on original clay tile flues often rust through at the flange after North Texas hail and freeze cycles. Once that seal opens, water tracks down the flue instead of shedding off the cap. Highland Park’s spring hail is hard on caps that are already fifteen or twenty years old.
- Top-mount dampers seized from disuse. Long hot summers mean fireplaces sit closed from roughly April to November. A Gelco top-mount damper that hasn’t moved in eight months can seize in the open or closed position, and either one compromises draft. We free them where the mechanism is sound and replace where it isn’t.
- Loose fasteners on historic brick stacks. Gelco caps installed on 1920s – 1950s masonry frequently develop loose fasteners as the original mortar beneath softens. A shifted cap admits water at the seam, which is why we check fastener torque and the mortar bed together.
- Hardened gaskets on retrofitted fireplace inserts. A Gelco fireplace insert set into an original masonry firebox may have gaskets and seals that stiffen with age. The smoky draft that results looks exactly like a creosote blockage, so we inspect before we assume the worst.
- Glazed soot mistaken for cap failure. Months of idle time let creosote and soot harden and glaze, and homeowners sometimes blame the cap for a draft problem that’s really a dirty flue. Cleaning and a Level 2 Inspection sort out which is which.
Gelco Service in Highland Park: What Local Conditions Mean for Your Equipment
Highland Park is one of the wealthiest enclaves in Texas, and hundreds of 1920s – 1950s architect-designed homes here still burn real wood in original masonry fireplaces. That changes what chimney cleaning means. This is preservation work on historic brick and lime mortar, not a suburban sweep-and-go, and it’s governed by strict town code and design-review expectations. A repair recommendation on a Gelco cap or damper has to survive scrutiny from you, from your designer, and from the Town.
That’s why we photograph and record every Gelco part we remove or install. When a cap needs replacing, the new component often has to visually match the original and be documented for any future exterior change. We keep that record and hand it to you. It’s also why technicians here routinely find clay flue tiles cracked by decades of thermal cycling and original mortar joints that have softened under the cap’s weight. The Gelco unit isn’t usually the whole story; the masonry it sits on is.
Gelco Models & Products We Service in Highland Park
We work on Gelco chimney caps, Gelco multi-flue caps, Gelco top-mount dampers, and Gelco fireplace inserts. For critical components like damper assemblies, we source OEM parts when they’re available. For caps and accessories, we use high-quality aftermarket parts where they’re equivalent or better, and we’ll tell you which is which before we install anything.
Choosing parts well comes down to fit and material. The variable is what’s underneath: the flue tile, the crown, the mortar bed. For Gelco work here we spend as much time on those as on the product itself.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Highland Park
Every job is priced per job by a written estimate, and the estimate is free. What drives the number is the scope of the work: a straightforward sweep and Level 2 Inspection sits at one end, while a cap replacement that includes mortar repointing and documentation for design review sits at the other. Access matters too. A steep-roof Tudor stack takes longer to reach safely than a low Colonial chimney.
When a Gelco component comes off, you’ll see the photo of it and the condition it was in. Nothing gets recommended without evidence you can look at yourself, and we say plainly when a repair can safely wait until after burning season. Call (833) 508-9984 for an exact quote. Estimates are free.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Highland Park
It usually means the replacement cap has to visually match the original and be documented for future exterior changes. We photograph the existing cap, record its dimensions and profile, and keep a written record of what was removed and installed. That record is yours to hand to a designer or the Town if a question comes up later.
Because fireplaces here sit unused through long, hot summers, and a damper that stays in one position for months can seize. The mechanism isn’t defective; it’s just been idle. We try to free a seized damper first and only recommend replacement when the assembly itself is worn out.
Replacement is usually the honest answer once rust has reached the mounting flange, because a patched flange will let water in again. On a lighter rust issue at the surface, cleaning and re-coating can buy years. We weigh the age of the cap and the condition of the mortar beneath it before we recommend either.
Yes. We clean around the insert rather than assuming it can be moved, and we inspect the gaskets and seals as part of the work. If the insert is set into original masonry, we handle the surrounding brick and mortar with the care that 1920s – 1950s fabric requires. Call (833) 508-9984 if you want a free estimate first.
A Level 2 inspection covers the accessible portions of the flue, the firebox, the crown, and every Gelco component on the stack, with photos of anything we find. It’s the right level when a cap or damper has been changed or when you’ve had a chimney fire. Call (833) 508-9984 to schedule one. Estimates are free.
Service Areas Near Highland Park
We also serve homeowners in East Dallas, Lakewood, Lake Highlands, White Rock, and Forest Hills. If you’re just outside those areas, call and we’ll tell you whether we cover your street. Our Highland Park work is booked the same way as everywhere else: an agreed window, a written estimate, and a photo record of what we found.
Book Your Gelco Service in Highland Park Today
Whether it’s a sweep before burning season or a Gelco cap that’s started to shift, we’ll book you a window and give you a free written estimate. Call (833) 508-9984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can read more about our Gelco service before you call.
Written by the team at Chimney Sweep Lake Highlands.