Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Highland Park?
Chimney cleaning in Highland Park typically costs $150 to $290 for a standard wood-burning fireplace, with most homes landing near $195. That range covers a routine sweep with a Level I inspection included. Homes that need a Level II inspection, a gas fireplace serviced, or a flue liner resurfaced will see higher estimates, and a written estimate sets the final price.
Highland Park homes tend to be older and larger than the regional average, and that shapes chimney pricing here more than anything else. An older masonry chimney often has more buildup, more than one flue, or a crown that’s been quietly taking on water. We work through the full scope, from the firebox to the cap, so you get one clear number instead of a handoff to a second contractor. Call (833) 508-9984 for a free estimate. We answer 24/7.
Key Takeaways
- Typical chimney cleaning in Highland Park: $150 to $290 for a standard masonry fireplace.
- A Level II inspection typically adds $125 to $275 on top of a basic sweep.
- Gas fireplace cleaning runs lower, usually $120 to $220, because there’s no creosote.
- Water intrusion from a bad cap or crown is the most common repair we find in this market.
- Free estimates by written quote. Call (833) 508-9984. We answer 24/7.
Chimney Cleaning Cost Breakdown (2026)
The table below shows estimated ranges for chimney cleaning and the add-ons Highland Park homeowners most often need. These are typical figures for the market, and the written estimate is what sets your price.
| Service | Estimated Cost Range | What It Covers |
|---|---|---|
| Standard chimney sweep (Level I inspection included) | $150 – $290 | Masonry or prefab flue cleaning, basic visual check, creosote removal |
| Gas fireplace cleaning and service | $120 – $220 | Firebox and log set cleaning, venting check, no creosote removal |
| Level II inspection (video scan) | $125 – $275 | Camera inspection of the flue interior, often bundled with a sweep |
| Flue liner resurfacing (HeatShield) | $1,800 – $3,400 | Resurfacing a deteriorated but structurally sound liner |
| Chimney cap installation | $230 – $520 | Stainless cap sized to the flue, keeps water and animals out |
| Crown repair or rebuild | $450 – $1,900 | Sealing cracks, replacing a failed crown at the top of the chase |
| Chimney relining (DuraFlex or Olympia) | $2,400 – $5,200 | Full flexible liner system installation for a compromised flue |
What Affects Chimney Cleaning Pricing in Highland Park
Two houses on the same block can get very different quotes, and it’s rarely about the sweep itself. Here’s what actually moves the number in this market.
- Number of flues. A lot of Highland Park homes have two or three flues serving separate fireplaces. Each one gets swept and checked separately, so a multi-flue chimney costs more than a single-flue one.
- How much creosote has built up. Light, dusty creosote sweeps out quickly. Glazed, tar-like creosote that’s been building for several seasons takes longer and more care, and we’ll say so plainly rather than quote low and pad it later.
- Whether a Level II inspection is needed. A basic sweep includes a Level I visual check. A camera scan of the flue (Level II) adds cost but catches problems a visual check can’t see, especially on a chimney that’s had a change in appliance or a prior repair.
- Roof access and chimney height. Tall chimneys and steep roofs take more setup. That’s a real cost factor, and it’s also one reason a trained technician should be the one up there, not a homeowner with a ladder.
- Masonry condition at the top. A crown that’s cracked or spalling, or a cap that’s missing or undersized, means water has likely been getting in. Many Highland Park chimneys are old enough that the crown and cap need attention even when the flue sweeps clean. Chimney cap and crown work is our specialization precisely because it’s the leading cause of chimney water damage in this market.
- Gas versus wood. Gas fireplaces don’t produce creosote the way wood does, so the cleaning scope is smaller and the price typically reflects that.
We work with professional-grade lines like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Using materials the chimney trade trusts matters on a resurfacing or relining job, because that’s where a cheap substitute shows up as a repeat problem a few seasons later.
How to Save on Chimney Cleaning
You don’t have to hunt for the lowest bid to keep this affordable. A few practical habits go a long way.
- Clean annually, not “when it needs it.” A yearly sweep is cheaper than a yearly sweep plus a glazed-creosote removal, and much cheaper than addressing a flue that’s been running hot for too long. Book the cleaning on a regular cycle and the cost stays in the standard range.
- Bundle the inspection with the sweep. A Level II camera inspection costs far less added to a scheduled cleaning than booked as a standalone visit.
- Don’t wait on the crown. A small crown crack sealed now is a fraction of a rebuild, and it keeps water out of the masonry where it does the real damage. Fixing it the first time also means you’re not paying for the same repair twice.
- Burn dry, seasoned wood. Wet wood produces more creosote, which means more buildup and more to remove. This one’s free and it’s the single biggest factor in how dirty your flue gets between cleanings.
- Ask for the written estimate up front. Any honest chimney company will put the price in writing before the work starts. Call (833) 508-9984 for your free estimate. We answer 24/7.
Common Chimney Problems We Find in Highland Park
A sweep is often the first time anyone has looked closely at a chimney in years, and the findings are pretty consistent across this market. The most frequent issue is water intrusion at the top: a cracked crown or a missing or damaged cap letting rain run into the masonry. Over time that shows up as interior staining, spalling brick, or a rusted damper. The second is deteriorated flue liner joints on older masonry chimneys. When the liner is sound underneath but the surface is failing, HeatShield resurfacing can restore it without a full reline. When the liner is compromised through, a new DuraFlex or Olympia liner system is the right fix. Because we handle discovery and resolution under one roof, you get a straight answer on which one you’re looking at, not a referral to a second company.
Why the Cheapest Sweep Isn’t Always the Cheapest
A $79 sweep flyer and a $195 sweep from a chimney specialist aren’t the same product. The low number usually means a brush down the flue with no real inspection, no camera, and no report on the crown or cap. What you save up front you often pay for later, when a cracked crown or a failing liner turns into a structural repair. We’re a chimney specialist, not a generalist who adds sweeping to a long service list. Every technician on every job is a chimney specialist. That focus is what lets us give you a clear price and a clear reason for it. Our technicians have up to 8 years of experience, and the inspection is never a formality. It’s how we find small problems before they become expensive ones.
FAQs – Chimney Cleaning Cost
How much does a chimney cleaning cost in Highland Park?
Most chimney cleanings in Highland Park cost between $150 and $290, with a typical home near $195. That includes the sweep and a Level I inspection. Call (833) 508-9984 for an exact quote. Estimates are free.
Is chimney cleaning more expensive if I have multiple flues?
Yes. Each flue is swept and inspected separately, so a two-flue chimney typically runs $280 to $480 and a three-flue can exceed $600. Call (833) 508-9984 and we’ll confirm your flue count and price.
How much does a Level II chimney inspection cost in Highland Park?
A Level II inspection runs about $125 to $275 and is cheapest when bundled with your sweep. It adds a camera scan of the flue interior. Call (833) 508-9984 to schedule both together.
Can you clean my chimney the same day?
Often, yes. Same-day service depends on schedule and the scope, but we dispatch crews from 7am to 7pm, Sunday through Friday. Call (833) 508-9984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is it cheaper to resurface my flue liner or replace it?
Resurfacing usually is, at $1,800 to $3,400, versus $2,400 to $5,200 for a full reline. Resurfacing (HeatShield) works when the liner is structurally sound but the surface is failing; a compromised liner needs replacement. Call (833) 508-9984 for a free estimate and a clear answer on which one you need.
What Happens When You Call
You’ll get a free estimate and a written price before any work starts. We set the price per job, so you know exactly what you’re paying and why. We handle the full scope, from the firebox to the cap, so nothing gets missed and nothing gets handed off to another contractor. Chimney work is all we do, which means every job gets a specialist, not a generalist. Call (833) 508-9984 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
If you want the wider picture on how we work and what we do, our chimney sweep Lake Highlands page lays it out.
Written by the team at Chimney Sweep Lake Highlands.
Pricing reflects the Highland Park market as of 2026. Chimney Sweep Lake Highlands offers free estimates – call (833) 508-9984.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jodi Brooks"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Tim Doyle"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Cole Sutton