Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in University Park?
Chimney cleaning in University Park typically runs $180 to $325 for a standard sweep on a wood-burning fireplace, and most one-story homes fall in the lower half of that range. Add a Level II inspection with a camera and you’re usually looking at $350 to $525 total. Homes here are mostly ranch and soft-contemporary stock built between the late 1940s and the 1970s, and the older fireboxes in that stock tend to have more creosote buildup than the square footage alone would suggest. Estimates are free, and the written estimate sets the final price.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cleaning Cost Breakdown (2026)
Here’s what the line items look like in the University Park market right now. These are typical ranges, not exact quotes – every chimney gets looked at before anyone writes a number down.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Standard sweep (Level I) | $180 – $325 | Firebox, damper, smoke chamber, flue. Covers up to about a quarter-inch of creosote. |
| Level II inspection with camera | $150 – $275 | Video scan of the flue, crown, cap and firebox. Standard when a flue has never been looked at. |
| Sweep + Level II inspection | $350 – $525 | The usual annual combo for a home with an active fireplace. |
| Heavy creosote removal (third-degree) | $425 – $750 | Glazed creosote that needs chemical treatment or rotary tools before it can be swept. |
| Chimney cap installation | $225 – $475 | Single-flue or multi-flue cap. Famco, Gelco and Copperfield caps are the products we use. |
| Crown repair or rebuilding | $375 – $1,100 | Cracked or spalling crown. Rebuilding is the upper end. |
| Flue relining (DuraFlex or Olympia) | $1,900 – $4,200 | Full stainless liner. Depends on flue height, shape and whether a fireplace insert is present. |
| HeatShield flue resurfacing | $1,200 – $2,600 | Resurfacing a deteriorating clay flue liner rather than replacing it. |
| Damper or firebox repair | $275 – $850 | Damper replacement, firebox mortar joints, firebrick. |
What pushes a University Park job up: a chimney that hasn’t been swept in several years, a gas log set that was converted back to wood, a flue with multiple offsets, and heavy creosote that needs treatment before sweeping. What keeps it down: a chimney that gets swept on a regular rhythm, a cap already in place, and a one-story roofline. Homes on the older blocks near the SMU campus tend to have fireplaces that have been run hard for decades, and that shows up in the creosote depth more than anything else.
What Affects Chimney Cleaning Pricing in University Park
- Chimney height and roofline access. A single-story ranch goes faster than a two-story with a steeply pitched roof. University Park has plenty of both, and the labor difference is real.
- Creosote condition. First-degree creosote sweeps out easily. Second-degree is sticky and takes longer. Third-degree is glazed on like tar and needs chemical treatment before it can be removed – that’s where the price jumps.
- Whether a Level II inspection is needed. If nobody has run a camera up the flue in the time you’ve lived there, it’s worth doing. A video scan finds cracked clay liners before they turn into a relining bill.
- Fireplace type. Wood-burning masonry fireplaces, factory-built units, and gas log sets each take a different approach. Gas logs require confirming the flue is clear and the damper isn’t blocked, which is a different job than sweeping out a wood box.
- Local tree canopy. University Park’s mature pecan and live oak canopy drops a lot of debris on roofs, and debris on the crown is the most common cause of water intrusion we find. A cap fixes it, but the collar and flashing often need attention at the same time.
- Age of the flue liner. Clay tile liners in older homes crack with heat cycling over time. A cracked liner is a fire risk, not a cosmetic issue, and relining with a DuraFlex or Olympia system is the fix.
What a Chimney Cleaning Actually Involves
A chimney sweep isn’t a quick brush pass. It means sealing the firebox opening, running brushes up the flue from below, then vacuuming the firebox, smoke chamber and damper area. We run a HEPA vacuum the entire time so nothing ends up on your rug or in your AC return.
After the sweep, we look at the crown, cap, flashing and firebox. That’s where the real value is – the sweep is routine, the inspection is what protects the house. A cracked crown lets water into the masonry, and once water gets in, you’re not talking about a sweep anymore, you’re talking about masonry repair. Caps and crowns done right the first time prevent the most common chimney water damage we see in this part of Dallas.
We handle the full scope, from the firebox to the cap, so nothing gets missed and there’s no handoff to a different trade mid-repair. Chimney work is all we do, which means every job gets a specialist, not a generalist. Our technicians have up to 8 years of experience, and they’re working with materials the chimney trade trusts, including DuraFlex, HeatShield, and Copperfield.
What Affects Whether You Need Repair, Not Just a Sweep
A cleaning visit sometimes turns up a repair. That’s normal, and it’s better to know than not. The three things we look for first:
- Cracked crown. A hairline crack in the concrete crown at the top of the chimney. Left alone, water gets behind it and freezing in a cold snap widens it.
- Missing or damaged cap. No cap means rain, birds, squirrels and leaves go straight down the flue. A cap is the single cheapest protection you can put on a chimney.
- Cracked flue liner. Clay tile liners crack with age and heat. A cracked liner lets heat reach combustible framing, and that’s a fire risk. Relining with a stainless DuraFlex or Olympia system solves it in one visit.
HeatShield resurfacing is the other option for a deteriorated flue. It’s a proprietary resurfacing system that restores a clay liner from the inside when a full reline isn’t necessary. Most sweep-only companies can’t do it – it takes a trained applicator and the right equipment. If your flue isn’t beyond saving, resurfacing is often the more economical call.
How to Save on Chimney Cleaning
There’s no secret discount to chase. The savings come from timing and from prevention. Here’s what actually works in University Park:
- Sweep on a schedule. Once a year if you burn regularly, and once every two or three years if the fireplace is mostly decorative. Heavy creosote costs more to remove than regular creosote.
- Get a cap on it. A $225 to $475 cap prevents debris and water problems that turn into $800 repairs. It’s the best ratio of cost to prevention in chimney work.
- Book the inspection and the sweep together. The combo runs $350 to $525 versus scheduling them separately.
- Sweep before burning season, not after. Late summer and early fall are when schedules fill. Getting it done before the first cold snap means more flexibility on appointment timing.
- Burn seasoned wood. Dry, split, seasoned hardwood produces less creosote than green wood or softwood. That’s basic physics, and it saves you money on every sweep.
- Ask for a free estimate. Call (833) 508-9984 for a free estimate. The number you get in writing is the number you pay.
Chimney Cleaning vs. Chimney Inspection: What Are You Actually Paying For?
They’re different services and they’re priced differently. A sweep removes creosote and debris from the flue and firebox. An inspection evaluates the condition of the flue, crown, cap, flashing and firebox. Both matter, and the CSIA-aligned inspection framework underlies how we structure all three levels:
- Level I inspection: visually checks accessible portions of the chimney and firebox. Standard when a chimney is in regular use and nothing has changed.
- Level II inspection: adds a video camera scan of the flue and is standard when a chimney has had a change in use (new insert, new appliance), after a chimney fire, or when the home changes hands.
- Level III inspection: involves opening up portions of the chimney when a serious issue is suspected. Rare, and only when there’s a real reason for it.
If you’ve never had a Level II inspection done on your chimney, it’s worth doing once. After that, the annual sweep plus a visual look is usually enough. The chimney sweep Lake Highlands service covers the routine side, and inspections, repair and relining all happen under the same roof so you’re not tracking down a second contractor to finish the job.
Why We Use the Materials the Trade Uses
Anyone can buy a wire brush and a shop vac. The difference is in the parts – what goes on the top of the chimney, what goes inside the flue, and whether the material holds up. We work with DuraFlex liner systems for relining, HeatShield for resurfacing, Gelco and Famco cap products, Olympia Chimney components, and Copperfield supplies. Those are the products professional chimney contractors actually install, not the commodity versions sold at big-box stores.
A cap that rusts in two years isn’t saving anyone money. A liner that fails because it was the wrong spec costs more to fix than the original reline. Getting the material right the first time is the whole game with chimney work.
Why University Park Homes Need Annual Sweeps
The homes in University Park are old enough that most of them have had at least one fireplace conversion, one insert added and removed, and one round of repairs in their history. That makes the chimney the most likely place in the house to find a surprise. The fireboxes built in the middle of the last century were designed for the wood available then, not for what’s burned today, and the flue lining geometry in those homes doesn’t always match a modern insert.
Winters here are mild, which is actually the reason annual maintenance matters. A fireplace that only gets used a handful of times a season still accumulates creosote, and still needs to be looked at. The house wasn’t designed for a cold climate – it was designed for an occasional wood fire, and the chimney performs best when it’s checked on the same rhythm every year.
FAQs – Chimney Cleaning Cost
How much does a chimney cleaning cost in University Park?
A standard chimney sweep in University Park runs $180 to $325. Sweep and Level II inspection together run $350 to $525. The written estimate sets the final price, and the estimate is free. Call (833) 508-9984.
Is a chimney sweep worth the money?
Yes. A $180 to $325 sweep annually prevents the two biggest chimney risks – creosote fires and water intrusion – which cost $1,200 to $4,200 to repair once they get going. A sweep is the cheapest part of chimney ownership. Call (833) 508-9984 for a free estimate.
How often should I have my University Park chimney cleaned?
Once a year if you burn wood regularly, and once every two to three years if the fireplace is used lightly. Gas log sets need an annual check too, even though they don’t build creosote the same way. Call (833) 508-9984 to schedule a free estimate.
Is it cheaper to repair or replace a chimney flue?
Resurfacing with HeatShield runs $1,200 to $2,600, and full relining runs $1,900 to $4,200. Resurfacing is usually the cheaper route when the liner can be salvaged; full relining is required when it can’t. Either way, it’s a fraction of the cost of fire damage. Call (833) 508-9984 for a free estimate.
Can you come out today?
Same-day service is often available. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 508-9984 and we’ll get you on the schedule.
Do I need a chimney cap in University Park?
Yes, and it’s the highest-value chimney purchase you can make. Caps run $225 to $475 installed and prevent the water intrusion and animal nesting that lead to masonry repairs. Call (833) 508-9984 for a free estimate.
Get a Free Estimate on Chimney Cleaning in University Park
Pricing on this page reflects the University Park market as of 2026, and the written estimate is the number that sticks. There’s no service-call fee, no trip charge, and no surprise line items. If you’ve never had the flue looked at, or if it’s been a few years and the fireplace has been getting more use than usual, call (833) 508-9984. Estimates are free, and we can usually get you on the schedule quickly. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the University Park market as of 2026. Chimney Sweep Lake Highlands offers free estimates – call (833) 508-9984.
Written by the team at Chimney Sweep Lake Highlands.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jodi Brooks"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Tim Doyle"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Cole Sutton