Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Richardson
If you own a home in Richardson, a chimney inspection tells you what nine idle months and a North Texas freeze have done to the flue before you light the first fire. We inspect chimneys across Richardson, from the original ranch blocks near downtown to the newer subdivisions out by Canyon Creek, and we build the visit around the house we’re standing in front of, not a checklist. Older masonry and newer factory-built steel systems fail in different ways, and an inspection that doesn’t know the difference misses the point. Call (833) 508-9984 to book.
Why Richardson Homeowners Call Chimney Sweep Lake Highlands for Chimney Inspection
Chimney work is all we do. Every technician who walks into a Richardson home is a chimney specialist, not a generalist crew rotating through HVAC and plumbing calls, and that shows up in what gets noticed. The most common thing we catch in 75080 and 75081 is a chase that still shares a flue with the original furnace, a setup that turns a routine inspection into a vent-and-CO safety assessment. Our technicians have up to 8 years of experience reading exactly those older Richardson systems.
We connect homeowners with vetted local professionals who carry the licensing and insurance their state requires, and the written estimate you get sets the final price with no surprises after the fact. We handle the full scope, from the firebox to the cap, so a discovery during inspection doesn’t turn into a handoff to a subcontractor. That’s why Richardson homeowners call us back year after year.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Richardson
Chimney inspections come in three levels, and which one fits your Richardson home depends on what you have and what you plan to do with it. Here’s how each works.
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the chimney: the firebox, damper, smoke chamber, flue and visible exterior. It’s the right call for a Richardson home you’ve used regularly with no changes since the last visit, and it’s the baseline we start from on an annual sweep. If anything looks off at this level, we move up.
Level 2 Inspection
A Level 2 inspection adds a video camera run of the flue and a look at accessible attic, crawlspace and chase areas. This is the level most Richardson ranch homes actually need, because it’s the only way to see the original clay-tile liner and to check whether the fireplace flue is still shared with an old furnace. Any change in the system (new appliance, a sale, a chimney fire, a hard freeze) calls for Level 2.
Level 3 Inspection
A Level 3 inspection is the deep one, used when a Level 1 or Level 2 finds a problem that can’t be assessed without opening up part of the chimney or its surround. We recommend it only when the evidence points there, and we document exactly why before any demolition. In older Richardson masonry, that’s usually a cracked liner or a damaged chase that has to be seen directly.
Camera Inspection
Our camera inspection sends a lighted video unit down the flue so you can watch the same feed we do. It’s how we confirm cracked clay tile, spalling mortar, or a nest-packed flue on a Richardson chimney, and you get photos in the report. Nothing gets recommended off a glance up the flue with a flashlight.
Trusted Brands We Service in Richardson
When an inspection turns up a liner that needs relining, we work with product lines the chimney trade trusts. DuraFlex and Olympia Chimney flexible liner systems are what we specify for most relines, and HeatShield is our go-to resurfacing system for a deteriorated flue that doesn’t need full replacement. Gelco, Famco and Copperfield supply the caps, crowns and components that finish the job. We don’t keep parts in stock locally; we source the right component for your chimney and schedule the work without a long wait. Using materials the chimney trade trusts, including DuraFlex, HeatShield and Copperfield, means the repair matches what your system was built for.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Richardson Homes
- Gas logs in a wood-built firebox. Many Richardson owners have swapped wood for gas in a masonry firebox designed for wood, and the clearance to combustibles and the damper operation get overlooked. A Level 2 inspection exposes both before they become a problem.
- Clay-tile liners cracked by the 2021 freeze. The hard February freeze and rapid warm-up cracked and spalled original clay tile across the older brick ranch blocks. Cracked tile lets creosote and carbon monoxide migrate into the chimney surround, which is why a post-freeze camera inspection matters.
- Fireplace flues shared with a furnace. Pre-1960 homes in Richardson often ran the fireplace and the original furnace up a single chase. Your furnace appliance and your fireplace need separate venting, so a “simple sweep” often becomes a vent-and-CO work order.
- Spalling mortar on single-wythe chimneys. Old tract-built masonry loses mortar when water gets into a cracked crown and then cycles through freeze-thaw. Left alone, that opens the door to water intrusion and structural repair.
Pricing for Chimney Inspection in Richardson, TX
Pricing here follows the inspection level plus what the chimney shows once we’re on it. A typical Level 1 inspection in Richardson runs $100 – $200. A Level 2 inspection with a camera run typically runs $200 – $400, and a Level 3 runs $400 – $1,500 or more when access work is involved. What moves the number: how many flues the house has, whether the furnace chase is shared, and whether a crown or cap repair gets added. If the inspection turns up a liner that needs a HeatShield or DuraFlex fix, that’s quoted separately with the evidence attached. The estimate is free, the price is set per job in writing, and the local pro is licensed and insured as their state requires. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait until next season.
We Also Serve Cities Near Richardson
Our chimney inspection team covers the neighborhoods around Richardson as well, including Lake Highlands, North Dallas, Garland and Sachse, and the surrounding areas along the Dallas North Tollway and Central Expressway. If you’re just over the line in one of those communities, you can book the same Level 1, Level 2 or camera inspection. If you’re not sure whether your street is in our range, call (833) 508-9984 and we’ll confirm.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Richardson
Most Richardson ranch homes in 75080 and 75081 should get a Level 2 inspection, especially if you’ve never had one or if the house still shares a chase with an old furnace. Level 1 is fine for a well-maintained chimney with no changes since the last visit, but a shared flue or a gas-log installation calls for the camera. Call (833) 508-9984 and we’ll help you sort out which one applies.
The 2021 freeze still shows up in Richardson as cracked and spalled original clay-tile liners, particularly on older single-wythe masonry chimneys. A rapid warm-up after a hard freeze lets moisture expand and crack the tile, and once a crack forms, creosote and CO can reach the chimney surround. A camera inspection is the only way to confirm it, so call (833) 508-9984.
Yes. Factory-built steel fireboxes and flues in 75082’s newer subdivisions still need an annual Level 1 inspection and a light sweep, and they come with manufacturer clearance requirements that a generalist won’t know. These systems don’t fail the way masonry does, but the clearances and the cap still need checking. Call (833) 508-9984 for an exact quote.
It can. North Texas summers idle fireplaces for months, which lets creosote harden into glazed third-degree deposits a standard brush can’t touch. When that happens, the fix is chemical or rotary cleaning, and an inspection tells you which. Call (833) 508-9984 and we’ll assess it.
NFPA 211 calls for a chimney to be inspected annually and after any event that could damage it, so yes, an idle year doesn’t exempt you. Even an unused flue collects nests and moisture, and a shared furnace chase needs a CO-safety check regardless. Call (833) 508-9984 for a free estimate.
If your Richardson home has a chimney you haven’t looked at in a while, book an inspection before the burning season gets going. Call (833) 508-9984. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We come out, run the camera, and hand you a written report with the evidence attached, so you can decide what actually needs doing.
Written by the team at Chimney Sweep Lake Highlands.